M38
- M38A1 GROUP 18 BODY
|
M38-M38A1 GROUP
18 BODY
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*NEW* Jeep Body Tub Kits
*INTRODUCING
the All NEW Body Tub Kits from an ALL NEW SUPPLIER.
*INTRODUCING
the All NEW Body Tub Kits from an our all new supplier, SGI from
India.
These are the highest quality Body Tubs
available on the market today for our hobby. They may be
the best reproduction tubs that will ever be produced.
The bodies fit excellently on frames and all
holes come pre-drilled.
We offer a full range of Bodies. The
following are currently in production;
In Production: Slat Grill - ACM1 - GPW
(no script) - ACM2 - CJ2A - CJ3A - CJ3B - CJ5 - M38 - M38A1
Please click below to visit our Body Kit
Page for more details.
- BODY KIT
PAGE -
(Pictured below is the newly developed M38
Body)
|
|
*NEW* Windshield Frame - M38A1
These are high quality reproduction Windshield
Frames for the M38A1 Jeep. From SGI.
- Price - $250.00 -
|
Top Bows M38-M381
These are original NOS Top Bows for the M38 and M38A1.
- Price On Request-
Reproductions also available.
|
Top Bow Rod Set - M38/M38A1
These are the
rods that go between the top bows and the windshield frame. These kits
are Made in the USA.
- $60.00 for a full set -
.
.
.
.
|
|
M38A1 Master Bow Bracket Set
These are all the parts to
install your bows. These are high
quality U.S. made reproductions. Correct Hardware Set also available.aaa
Each piece also available individually, Call
me.
|
M38 Master Bow Bracket Set
These are all the parts to
install your bows. These are high
quality U.S. made reproductions.a
Price $125.00
Each piece also available individually, Call
me.
.
.
.
.
|
|
Top
Bow Wing Screws - M38/M38A1 These are high quality reproduction Top
Bow Thumb Screws for the M38 and M38A1.
- Price - $12.00
each -
|
Grab Handle (on Dash) - M38A1
This is a high quality reproduction of the M38A1 Dash Grab
Handle.
Price - $50.00 -
|
Door Curtain Retainer Set - M38 Only
This set of contains the upper left (on windshield), upper
right (on windshield), lower left (on cowl) and lower right (on cowl)
retainer brackets for the doorway curtains of the M38 Jeep. These are U.S.
Made exact reproductions.
- Price - Set of 4 Retainers - $120.00
All pieces also sold separetly - Upper Retainers are
$35.00 each, Lower Retainers are $25.00 each.
|
Hood -M38
These are high quality reproduction Hoods for the
M38. Marked Willys. From SGI.
- Price - $350.00 -
|
Tail Gate -M38
These are high quality reproduction Tail Gates for the
M38. Marked Willys. From SGI.
- Price - $165.00 -
|
Front Driver Side Quarter Panel - M38
These are a high quality reproduction Front Driver Side
Quarter Panels for the M38. Includes the Step and Cowl Support as
pictured. From SGI
- Price - $175.00 -
|
Front Passenger Side Quarter Panel - M38
These are a high quality reproduction Front Passenger Side
Quarter Panels for the M38. Includes the Step and Cowl Support as
pictured. From SGI
- Price - $175.00 -
|
Rear Driver Side Quarter Panel - M38
These are a high quality reproduction Rear Driver Side
Quarter Panels for the M38. From SGI
- Price - $275.00 -
|
Rear Passenger Side Quarter Panel - M38
These are a high quality reproduction Rear Passenger Side
Quarter Panels for the M38. From SGI
- Price - $275.00 -
|
Driver Body Side Panel - M38A1
These are a high quality reproduction Driver Side Body Panels for the
M38A1. From SGI
- Price - $300.00 -
|
Passenger Side Body Panel - M38A1
These are a high quality reproduction Passenger Side Body Panels for the
M38A1. From SGI
- Price - $300.00 -
|
|
M38A1 Rear Panel These are the new high quality reproduction Rear
Panels for the M38A1 Jeep. They are made in Europe. Comes with
Tail Light Brackets (not pictured).
- Price - $375.00 -
|
|
M38A1 Dash Panel These are the new high quality reproduction
Dash Panels for the M38A1 Jeep. These panels are made in Europe.
- Price on Request -
|
|
M38 & M38A1 Rear Seat Frame
These are the new high quality reproduction Rear Seat Frames for the
M38 and M38A1 Jeep. They are made in Europe. The Seat Pans have
the correct ribbing and all holes come drilled for mounting seat
cushions. These seat frames were manufactured with the correct
geometry allowing them to fold open and close like an original seat frame.
- Price - $285.00 -
|
|
M38 and M38A1 Firewall Grommet Sets
These are our high quality reproduction Firewall
Grommet Sets for the M38 and M38A1. These are all of the grommets
required for getting your wiring and cables safetly passed through the
Firewall of your Jeep.
- Price - $25.00 per set -
|
|
*NEW* M38A1 Rear Floor Pan
These are the new high quality U.S. Made Rear Floor Pans for the
M38A1.
Price $325.00
|
M38 Front Floor Pan
These are the new high quality replacement floor pans. If your
front floor pans are rotted out these replacement pans are the solution to
your problem. They come with all holes drilled and weld nuts in
place. Sold individually as left and right side.
Price $135.00 each
(click for larger picture)
|
M38A1 Front Floor Pan
These are the new high quality replacement floor pans. If your
front floor pans are rotted out these replacement pans are the solution to
your problem. They come with all holes drilled and weld nuts in
place. Sold individually as left and right side.
Price $135.00 each
.
.
.
.
|
M38 Hat Channel Kit
These are new high quality reproduction Hat Channel Kits for the
M38. If your hat channels are rotted out this kit will be the solution
to your problem. Comes with all holes drilled. This kit also
fits the CJ2A and CJ3A.
Price $145.00
|
M38A1 Hat Channel Kit
These are new high quality Hat Channel Kits for the M38A1. If your hat
channels are rotted out this kit will be the solution to your problem.
Comes with all holes drilled.
Price $150.00
|
M38 Transmission Upper Floor Cover
These are high quality reproduction Transmission Upper &
Lower Floor Covers for the M38. From SGI.
- Price - $30.00 -
|
M38 Transmission Lower Floor Cover
These are high quality reproduction Transmission Upper & Lower Floor
Covers for the M38. From SGI.
- Price - $120.00 -
|
Front Floor M38
These are high quality front floor assemblies (with hat
channels) for the M38 Jeep. From SGI.
- Price - $550.00 -
.
.
|
Floor Pan Hardware Set M38-M38A1
These are 10 correct sunken head 1/4 x 5/8 inch bolts Used on the floors and many other areas of the body. These are generally used with a large flat washer which are not supplied. These bolts are very hard to find.
- Price - $10.00 -
|
|
Accelerator Foot
Rest
This is one of
those parts that are always missing.
It is mounted on the floorboard next to the accelerator
pedal.
Accelerator Foot
Rest - $12.00
.
.
.
.
|
Tool Box M38-M38A1
These are the new high quality reproduction Tool Boxes for the
M38. From SGI.
- Price - $250.00 -
|
M38 Cowl/Dash Support
These are a new high quality product which will also fit MB, GPW, CJ2A &
CJ3A. Left and Right side available.
- Price $40.00 each -
|
M38A1 Fuel Tank Well
This is a high quality reproduction of the Fuel Tank Well for the M38A1. This part is always
rusted out and generally not salvageable.
Price $130.00
.
.
|
Lower Front Body Patch Panel - M38A1
This is a patch panel that goes from the front fender to wheel
well. Made in the USA. This will also fit the CJ5.
Driver and Passenger Side available.
- Price - $75.00 -
|
M38-M38A1 Seat Pan Driver & Passenger
This is a high quality reproduction of the seat pan with weld nuts.
- $40.00 each -
.
.
.
.
|
M38 Fuel Tank
- IN STOCK -
These are reproduction Fuel Tanks for the M38 Jeep.
Please call to order.
- Price on Request -
|
M38A1 Fuel Tank
- IN STOCK -
These are reproduction Fuel Tanks for the M38A1 Jeep.
Please call to order.
- Price on Request -
|
|
Wheel House Repair Panel - M38A1
This panel is for replacing a dented or rusted out wheel house.
Right panel pictured - both left and right side are available. Limited Quantity. With
minor modification this can be used on the CJ5.
Price $125.00
|
Grab Handle (on Dash) - M38A1
This is a high quality reproduction of the M38A1 Dash Grab
Handle.
Price - $50.00 -
|
|
Battery Box Cowl
This is a high quality reproduction of the Cowl Battery
Box.
Box with Bottom $120.00
Bottom separate $45.00
|
Battery Box Under Hood
This is a high quality reproduction of the Under Hood
Battery Box. This comes complete with bottom tray, battery hold down
with bolts, fender mount brackets and decal. You will find no better
box than this one.
Price $245.00
|
*NEW* Glove Box Door Seal - M38
These are our new High Quality Glove Box Door Seals for the
M38. These are Made in the USA. Copied from an original
sample. These seals can easily be installed using Automotive weather
strip adhesive.
- Price $10.00 -
|
*NEW* Battery Box Cover Seal - M38
These are our new High Quality Rubber Battery Box Cover Seals for the
M38. These are Made in the USA. Copied from an original
sample. These seals can easily be installed using Automotive weather
strip adhesive.
- Price $10.00 -
|
|
NEW M38A1 Cowl Battery Box
This is a new high quality reproduction of the M38A1 Cowl
Battery Box. Battery Box Bottom sold separately.
Cowl Battery Box - $136.00
Cowl Battery Box Bottom - $39.00
|
|
M38A1 Battery Box Cover
This is
another high quality reproduction from an original die.
Price $110.00
Screws now Available $3.50 each
Battery Box Lid Seal also Available $8.00
Also Available - Late Type M38A1 Battery Box Cover with Strap.
|
Battery Tray - M38/M38A1
This is an exact reproduction of both the M38 and M38A1
Battery Trays.
Battery Tray - M38 or M38A1 - $75.00 each
|
|
Battery Box Cover Seal - M38A1
These are our new High Quality Rubber Battery Box Cover Seals for the
M38A1. These seals come in a roll as pictured and can be easily
installed.
- Price $10.00 -
|
Fuel Tank Neck Grommet - M38/M38A1
I had
these Fuel Tank Neck Grommets made by the original government
contractor. These
are not cheap imports like those that others sell.
Price $18.00
.
.
.
|
Body Pad Set M38-M38A1
These are sets of 10 Body Pads for the M38 and M38A1.
Made in the U.S.A.
-Price - $20.00 -
|
Steering Column Floor Seal & Plate Set
This is the steering column floor seal and plate for the
M38 and M38A1. This will also fit the CJ2A, CJ3A and CJ3B.
Steering Column Floor Seal & Plate Set - $20.00 per Set
|
|
Transmission Shift Lever Boot - M38/M38A1
This Transmission Boot is new and improved with a high quality
material that will resist sun damage. This is a high quality U.S. Made
product.
Transmission Boot - Price $18.00
|
Transfer Case Shift Lever Boot - M38/M38A1
This Transfer Boot is new and improved with a high quality
material that will resist sun damage. This is a high quality U.S. Made
product.
Transfer Case Boot - Price $12.00
|
|
Glove Box Door Seal - M38A1
These are our new High Quality Rubber Glove Box Door Seals for the M38A1.
These seals come in a roll as pictured and can be easily installed.
- Price $10.00 -
|
Tool Box Seal
This is the seal
that fits around the tool box door. I had this one copied from the original.
Tool Box Seal - Price $15.00
|
|
Grill Welting Kit M38
This is the grill welting material that is riveted to the
grill. All of the pieces in this kit are cut to length and ready to be
riveted. This kit comes with the welting material and rivets as
pictured.
Price $15.00
|
Grill Welting Kit M38A1
This is the grill welting material that is riveted to the
grill. The piece in this kit is cut to length and ready to be
riveted. This kit comes with the welting material and rivets as
pictured.
Price $15.00
|
|
Data Plate Set - M38 & M38A1
These are sold as a complete set. Mounting plate
sold separately. These are the highest quality data plates available
today.
Data Plate Set - M38 & M38A1
Price $50.00 Per Set
Data
Plate Rivet Set also available for $5.00
|
Data
Plate Mounting Plate
I had these copied from an
original plate. Drilled and ready for mounting data plates.
Data
Plate Mounting Plate - Price $20.00
.
.
.
.
|
|
Fording Data Plate - M38/M38A1
This is a high quality reproduction of the Fording Data
Plate.
- Price $10.00 -
|
Patent Data Plate - M38/M38A1
This is a high quality reproduction of the Patent Data
Plate.
- Price $10.00 -
|
|
Mirror Arm - M38 & M38A1
These are high quality double
jointed Mirror Arms for the CJ2A, CJ3A, M38 and M38A1. Heavy
Duty and correct 4 hole mounting for the listed vehicles.
CJ2A - CJ3A Mirror Arm - Price
$30.00
.
|
Tinted Mirror Head M38-M38A1
These are high quality
reproduction mirror heads.
Price $25.00
|
|
*New High Quality* Tinted Inside Rear View Mirror w/
Bracket - M38/M38A1
These are our new high quality Tinted Glass Inside Rear
View Mirrors for the more discerning M38 and M38A1 owner. These
mirrors have the same tinted glass as our high quality side mirrors.
Tinted Inside Rear View Mirror w/ Bracket - M38/M38A1 -
Price $50.00
|
M38/M38A1 Inside Mirror w/ Mounting Bracket
M38/M38A1 Inside Mirror w/ Mounting Bracket - Price $40.00
|
Red Reflector (set of 4) - M38/M38A1
- Price - $25.00 per set of four -
|
|
3 Piece Rifle Bracket Set - M38
These are
the brackets that hold the rifle carrier to the windshield frame.
3 Piece Rifle Bracket Set - M38 -
Price $30.00 -
|
Rifle Rack
This was mounted on the windshield frame of M38
models. It is the best reproduction of this item available.
Price $185.00
.
.
.
.
.
.
|
|
M38A1 Windshield to Cowl Rubber
This is the highest quality cowl rubber available for the
M38A1 unlike others being offered that are too thick and don't fit properly.
M38A1 Windshield to Cowl Rubber - Price $40.00
|
M38A1 Inner Windshield
Rubber
This is the rubber inner seal for the two piece windshield. A perfect
reproduction, complete with lock strip.
M38A1 Inner Windshield Rubber -
Price $80.00
|
|
M38 Cowl Rubber
We are pretty excited about this new product. This is an exact
reproduction of the M38 cowl rubber which has been in production for over a
year and copied from an original sample. You may not be aware of this,
but cowl rubbers vary from model to model and the M38 rubber is different
from all the rest. If you are looking for that perfect fit, this is
the one to buy.
M38 Cowl Rubber - Price $65.00
Correct Screws available $3.00 per set.
|
M38 Inner Windshield
Rubber
This is the rubber inner seal for the
single piece windshield, complete with lock strip.
M38 Inner Windshield Rubber -
Price $65.00
.
.
.
.
|
Vacuum Windshield Wiper Arm, Blade & Nut Set
- VACUUM WIPERS ONLY -
These are high quality reproduction sets that contain a Wiper Arm, Wiper
Blade and Wiper Nut for maintaining the good function of your Vacuum
Windshield wipers.
- Price - $19.50 -
|
Hood Drain - M38
Hood Drain for all flat fender models.
This part mounts on the existing hood hinge and diverts water away
from the engine along the cowl. This
will prevent water from entering the spark plugs.
Hood Drain - M38 - Price $15.00
|
|
M38A1 Hood Bumper
These are the bumpers mounted on the top of the windshield frame.
M38A1 Hood Bumper - $30.00 per pair
.
|
M38 Oak Hood Bumper Set
These are oak blocks that bolt to hood and support the
windshield when it is lain down.
M38 Oak Hood Bumper Set - $30.00 per pair
|
|
Accelerator Foot
Rest
This is one of
those parts that are always missing.
It is mounted on the floorboard next to the accelerator
pedal.
Accelerator Foot
Rest - $12.00
|
Don't see what you are
looking for?
.
Try checking our M38-M38A1
Body Parts Listing.
.
If something does not have a button
to click for ordering then give us a call or send us an email.
|
|
|
|
Don't see what you are
looking for?
Try checking our M38-M38A1
Body Parts Listing. If something does not have a button
to click for ordering then give us a call or send us an email. |
|
Part #
|
Part Description (Body)
|
Price
|
|
|
|
|
|
|
BODY KITS
AVAILABLE, CALL ME
|
|
|
WO-674875
|
Guard, headlight U.S. made, The
best available – M38
|
$17.50 R.
|
| (1)
(2) |
Panel,
Dash - M38A1 (European manufacture) |
$POR.R. |
| PICTURE |
Handle,
grab (on passenger side Dash)- M38A1 |
$50.00
R. |
|
WO-673706
|
Striker, glove box – M38
|
$7.00 NOS
|
|
|
Striker,
glove box - M38A1
|
$7.00 R.
|
|
WO-673708
|
Lock, glove box M38-M38A1
|
$30.00 R.
|
|
|
Door, glove box – M38A1
|
$POR. NOS.
|
|
WO-673783
|
Hinge, first aid kit brt – M38
|
$POR. NOS.
|
|
WO-673800
|
|
$POR. NOS.
|
|
WO-800393
|
Fastener,
cluster to dash
|
$4.00
NOS
|
|
WO-7526590
|
Stud,
cluster to dash
|
$4.00
NOS
|
|
WO-800783
|
Rest, foot accelerator
|
$12.00 R.
|
|
WO-649745
|
Clamp, fuel tank hold down –
M38
|
$8.00 NOS
|
|
|
Grommet, set firewall – M38
|
$25.00 R.
|
|
|
Grommet, set firewall – M38A1
|
$25.00 R.
|
|
|
Grommet, battery box
|
$3.50 R.
|
|
WO-120275
|
Arm, mirror assembly High Quality
|
$30.00 R.
|
|
PICTURE
|
Mirror, tinted high quality
|
$25.00 R.
|
|
|
Mirror, assembly
|
$15.00 R.
|
|
|
Mirror, inside
rear view w/ brt
|
$40.00 R.
|
|
WO-INSIDE
|
Mirror,
rear view inside w/ bracket - Tinted
|
$50.00
R.
|
|
|
Seal, drain plug, gas tank –
M38A1
|
$7.00 R.
|
|
WO-801279
|
Seal, steering column to floor
M38-M38A1
|
$10.00 R.
|
|
PICTURE
|
Plate, steering seal retainer set
of 2
|
$10.00 R.
|
|
WO-673697
|
Seal, glove box door – M38
|
$10.00 R.
|
|
WO-680143
|
Seal, glove box
door – M38A1
|
$10.00 NOS
|
|
WO-674232
|
Seal,
rubber, tool box door M38-M38A1
|
$15.00 R.
|
| PICTURE |
Seal,
battery box cover - M38 |
$10.00
R. |
|
WO-680381
|
Seal, battery box cover – M38A1
|
$10.00 R.
|
| Picture |
Grill welting kit
w/ rivets
- M38
|
$17.00 R.
|
| Picture |
Grill welting kit
w/ rivets
- M38A1
|
$17.00 R.
|
|
WO-647574
|
Boot, rubber, gear shift lever
trans
- U.S. Made
|
$18.00 R.
|
|
WO-647574
|
Boot, rubber, gear shift lever
trans
|
$POR. NOS.
|
|
|
Boot, rubber, gear shift lever
transfer case High Quality - reengineered for a longer
life
|
$12.00 R.
|
|
WO-646073
|
Boot, accelerator pedal on floor
board
|
$15.00 NOS
|
|
WO-801568
|
|
$8.00 NOS
|
|
WO-673803
|
Bow,
top assembly M38-M38A1
|
$P.O.R. R.
|
|
WO-673803
|
Bow,
top assembly M38-M38A1
|
$POR.NOS
|
|
WO-673765
|
Bracket,
top bow stowage front – M38 U.S. made
|
$15.00 R.
|
|
WO-764300
|
Bracket,
top bow stowage rear – M38 U.S. made
|
$15.00 R.
|
|
WO-680309
|
Bracket,
top bow stowage front – M38A1 U.S. made
|
$15.00 R.
|
|
WO-680312
|
Bracket,
top bow stowage rear – M38A1 U.S. made
|
$15.00 R.
|
|
WO-673711
|
Socket,
top bow M38-M38A1 U.S. made
|
$15.00 R.
|
|
WO-673773
|
Brt,
RH bow socket
|
$10.00 R.
|
|
WO-674790
|
Screw,
thumb, bow brt M38-M38A1
|
$12.00 NOS
|
| ROD-SET |
Rod
Set, top bow - U.S. Made |
$60.00
R. |
| PICTURE |
Master
Bow Bracket Set - M38 |
$125.00
R. |
| PICTURE |
Master
Bow Bracket Set - M38A1 |
$125.00
R. |
|
WO-674622
|
Chain,
bow thumb screw
|
$7.50 R.
|
|
WO-672456
|
Loop,
footman
|
$4.00 NOS
|
|
WO-674646
|
Bracket,
axe handle – M38 Best available
|
$15.00 R.
|
|
WO-A-2984
|
Clamp,
axe head hinged – M38 U.S. made best available
|
$20.00 R.
|
|
WO-673769
|
Bracket,
shovel head – M38 U.S. made
|
$15.00 R.
|
|
WO-681264
|
Retainer,
axe blade w/house panel – M38A1
|
$20.00 NOS
|
|
|
Frame, door
driver or passenger - M38A1
|
$POR.NOS.
|
|
WO-673536
|
Frame,
seat drivers – M38 (N.O.S. avail call)
|
$P.O.R. R.
|
|
WO-680257
|
Frame,
seat drivers – M38A1
|
$225.00 NOS
|
|
WO-673511
|
Frame,
seat pass M38-M38A1 (N.O.S. avail call)
|
$P.O.R. R.
|
|
WO-673408
|
Frame,
seat rear
|
$285.00 R.
|
| PICTURE |
Pan,
seat driver or passenger w/ weld nuts |
$40.00
R. |
|
|
Used
seat frames available call me
|
$P.O.R
|
|
WO-673562
|
Pivot,
front seat hinge right
|
$25.00 NOS
|
|
WO-674425
|
Pivot,
front seat hinge left
|
$25.00 NOS
|
|
PICTURE
|
Chain & Pin Set, pivot front
seat
|
$15.00 R.
|
|
WO-673338
|
Retainer,
rear seat frame hook – M38
|
$15.00 R.
|
|
WO-681161
|
Retainer,
rear seat frame hook – M38A1
|
$15.00 NOS
|
|
WO-673577
|
Retainer,
rear seat frame pivot tube lock
|
$4.00 NOS
|
|
WO-673593
|
Spring,
retaining, rear seat frame
|
$8.00 NOS
|
| WO-673339 |
Bracket,
pivot rear seat |
$15.00
R. |
|
WELD-BRT
|
Brt,
retaining rear seat (spot welded wheel housing)
|
$15.00 R.
|
|
R-SEAT-KIT
|
Kit,
rear seat mt hardware set 10pc
- M38
|
$110.00 R.
|
|
R-SEAT-KIT
|
Kit,
rear seat mt hardware set 10pc
- M38A1
|
$110.00 R.
|
|
WO-673498
|
Spring,
seat bottom rear
|
$30.00 NOS
|
|
WO-673394
|
Bracket,
rifle mounting left – M38
|
$10.00 R.
|
|
WO-673380
|
Bracket,
rifle mounting right – M38
|
$10.00 R.
|
|
WO-673395
|
Bracket,
rifle mounting end – M38
|
$10.00 R.
|
|
RIFLE
KIT
|
Brackets,
rifle mounting, set – M38
|
$30.00 R.
|
|
WO-674230
|
Plug,
drain glove box / tool box
|
$10.00 NOS
|
|
WO-674364
|
Cover,
drain hole, front floor pan
|
$10.00 R.
|
|
WO-674410
|
Screw,
drain hole cover
|
$3.00 NOS
|
|
WO-674882
|
Cover,
access, brake master cyl
|
$25.00 R.
|
|
WO-674884
|
Cover,
access, engine
|
$35.00 NOS
|
|
WO-680509
|
Cover,
transmission front floor pan upper
- SGI
|
$30.00 R.
|
|
WO-674910
|
Cover,
transmission front floor pan lower
- SGI
|
$120.00 R.
|
|
WO-673474
|
Cover,
access, transmission
|
$35.00 NOS
|
|
WO-673805
|
Cover,
battery box cowl – M38
|
$POR. R.
|
|
PICTURE
|
Screw,
battery box cover
|
$3.50 R.
|
|
WO-674957
|
Catch,
tool box lid
|
$5.00 NOS
|
|
WO-674956
|
Ring,
tool box lid
|
$3.00 NOS
|
|
WO-673332
|
Tailgate
– M38
|
$P.O.R. R.
|
| |
Door
& Side Curtain Installation Kit - M38A1 |
$POR.
NOS. |
|
WO-680821
|
Brt,
support, side rail, left top – M38A1
|
$15.00 R.
|
|
WO-680822
|
Brt,
support, side rail, right top – M38A1
|
$15.00 R.
|
|
WO-680751
|
Brt,
door hinge, upper left, U.S. Made – M38A1
|
$15.00 R
|
|
WO-680752
|
Brt,
door hinge, upper right, U.S. Made – M38A1
|
$15.00 R.
|
| WO-680371 |
Slide,
door, upper hinge left - M38A1 |
$35.00
R. |
| WO-680372 |
Slide,
door, upper hinge right - M38A1 |
$35.00
R. |
|
|
Socket, left door lower hinge –
M38
|
$12.00 R.
|
|
|
Socket, right door lower hinge
– M38
|
$12.00 R.
|
| WO-674089 |
Retainer,
left door curtain, upper, U.S. Made - M38 |
$35.00
R. |
| WO-674637 |
Retainer,
right door curtain upper, U.S. Made - M38 |
$35.00
R. |
| WO-674217 |
Retainer,
left door curtain to cowl side panel, lower, U.S. Made -
M38 |
$25.00
R. |
| WO-674218 |
Retainer,
right door curtain to cowl side panel, lower, U.S. Made -
M38 |
$25.00
R. |
|
WO-673286
|
Frame,
windshield – M38
|
$P.O.R. R.
|
|
WO-680559
|
Frame,
windshield – M38A1
|
$P.O.R. R.
|
| |
Screw,
Windshield Hinge to Body (Phillips Head) |
$P.O.R. |
|
WO-681455
|
Hinge,
Windshield, cowl half left
|
$60.00 R.
|
|
WO-681456
|
Hinge,
Windshield, cowl half right
|
$60.00 R.
|
|
WO-681457
|
Hinge,
Windshield, windshield half left - *New High Quality -
Fits!
|
$50.00 R.
|
|
WO-681458
|
Hinge,
Windshield, windshield half right - *New High Quality -
Fits!
|
$50.00 R.
|
| PICTURE |
Screw
Set, Upper Windshield Hinge (windshield side) - M38A1 |
$20.00
R. |
| PICTURE |
Screw
Set, Lower Windshield Hinge (cowl side) - M38A1 |
$20.00
R. |
|
WO-943775
|
Bolt, Hinge
Windshield
|
$2.00 NOS
|
|
WO-673556
|
Bracket,
pivot, windshield, right – M38
|
$22.50 NOS
|
|
WO-673555
|
Bracket,
pivot windshield, left – M38
|
$22.50 NOS
|
|
|
Bolt,
windshield to cowl mounting - M38
|
$10.00 R.
|
| |
Strap
windshield to grill
|
$12.00 R.
|
|
WO-680577
|
Bolt
U catch hood to windshield – M38A1
|
$20.00 NOS
|
|
WO-680607
|
Catch,
hood to windshield – M38A1
|
$35.00 NOS
|
|
WO-67355
3
|
Catch,
windshield to dash M38-M38A1
|
$7.00 NOS
|
|
WO-674234
|
Weatherseal,
windshield to cowl – M38 New High Quality
|
$59.00 R.
|
|
|
Cowl Rubber
Screw Set - M38
|
$3.00 R.
|
|
WO-674233
|
Weatherseal,
windshield W/lock – M38
|
$65.00 R.
|
|
WO-680505
|
Weatherseal,
windshield to cowl – M38A1
|
$40.00 R.
|
|
WO-680430
|
Weatherseal,
inner windshield W/lock – M38A1
|
$80.00 R.
|
|
WO-681080
|
Motor,
wiper, Trico original NOS w/hand wiper
|
$POR. NOS.
|
|
WO-681080
|
Motor,
wiper, Trico NOS no hand wiper
|
$125.00 R.
|
|
WO-680413
|
Screw,
windshield wiper mounting
|
$1.50 NOS
|
|
WO-A-12865
|
Arm,
windshield wiper
|
$10.00 R.
|
|
WO-500813
|
Blade,
windshield wiper
|
$5.00 NOS
|
|
WO-A-12863
|
Nut,
wiper arm to motor
|
$4.50 NOS
|
|
WO-680750
|
Valve,
shutoff windshield wiper – M38
|
$25.00 NOS
|
|
WO-680750
|
Valve,
shutoff windshield wiper – M38A1
|
$25.00 NOS
|
|
WO-674697
|
Tubing,
copper, wiper motor
|
$POR. NOS.
|
|
WO-673719
|
Hose,
rubber, wiper motor
|
$10.00 R.
|
|
PICTURE
|
Clip,
vacuum hose
|
$3.50 NOS
|
|
WO-ELE 12V
|
Motor, wiper
electric w/arm & blade 12v
|
$75.00 R.
|
|
WO-ELE 24V
|
|
$75.00 R.
|
|
WO-673623
|
Tee,
hose vacuum line Y
|
$14.00 R.
|
|
Picture
(2)
|
Body Step, L & R available
|
$35.00 R.
|
|
WO-673446
(2)
(3)
|
Pan,
Front Floor Complete w/ Hat Channels – M38
Original NOS - Nothing Better
|
$POR. NOS.
|
|
FLOOR-D-M38
|
Pan, floor
driver - M38 U.S. Made no hat channels
|
$135.00 R.
|
|
FLOOR-P-M38
|
Pan, floor
passenger - M38 - U.S. Made no hat channels
|
$135.00 R.
|
|
HAT-M38
|
Hat channel
kit - M38 6 pc set U.S. Made
|
$145.00 R.
|
|
WELL-M38A1
|
Well,
fuel tank, floor – M38A1
|
$130.00 R.
|
|
Picture
|
Floor,
with well driver side – M38A1
|
$275.00 NOS
|
|
FLOOR-D-A1
|
Pan, floor
driver - M38A1 U.S. Made no hat channels
|
$135.00 R
|
|
FLOOR-P-A1
|
Pan, floor
passenger - M38A1 U.S. Made no hat channels
|
$135.00 R.
|
|
HAT-M38A1
|
Hat channel
kit - M38A1 5 pc set U.S. Made
|
$150.00 R.
|
| REAR-FLOOR |
Pan,
Rear Floor - U.S. Made - M38A1 |
$325.00
R. |
| FLOOR-SCREWS |
Floor
Pan Screw (hardware) Set |
$10.00
R. |
| PICTURE |
Wheel
House Repair Panel, Right Rear - M38A1 |
$125.00
NOS |
| PICTURE |
Patch
Panel, lower front body - U.S. Made - M38A1 |
$75.00
R. |
| BODY-GUSSET |
Gusset,
body, U.S. Made - M38 |
$15.00
R. |
| WO-TOOLBOX |
Toolbox
w/ Lid |
$P.O.R.
R. |
|
PICTURE
|
Panel, Rear - M38A1 (European
manufacture)
|
$375.00 R.
|
|
|
Panel, rear
tail light cover - M38A1
|
$25.00 R.
|
|
|
Panel, rear
tail light cover - M38
|
$25.00 R.
|
|
|
Tail light
mounting bracket - Left or Right
|
$15.00 R.
|
|
WO-673586
|
Cushion,
rear seat spring M38-M38A1
|
$45.00 NOS
|
|
WO-691543
|
Cushion,
left rear M170
|
$20.00 NOS
|
|
|
Curtain,
rear left side – M38A1
|
$20.00 NOS
|
|
WO-506101
|
Reflector,
red
(set of 4)
|
$25.00 R.
|
| WO-670345
|
|
$15.00
NOS
|
|
PICTURE
|
Data
plate set – M38
|
$50.00 R.
|
|
PICTURE
|
Data
plate set – M38A1
|
$50.00 R.
|
|
WO-802634
|
Plate,
data plate mounting plate
|
$20.00 R.
|
|
PICTURE
|
Data
plate patent plate M38-M38A1
|
$10.00 R.
|
|
PICTURE
|
Rivet
set
|
$5.00 R.
|
|
PICTURE
|
Data
plate fording
|
$10.00 R.
|
|
PICTURE
|
Data
plate on/off
|
$10.00 R.
|
| |
|
|
| |
END |
|
|
