CJ2A - CJ3A - Premier Parts - Peter DeBella Jeep Parts

WEB PREMIERS
Prices are subject to change without notice.

Call (631) 874-8660 Fax (631) 874-3831

CJ2A - CJ3A PREMIER PARTS

Please visit our Jeep Parts Catalogs to view our entire selection of Jeep Parts. We offer many more parts than what is pictured here.

CJ2A - CJ3A PREMIER PARTS

CJ2A-CJ3A CATALOG GROUPS

*NEW* Ignition Coil - 6 Volt

For years it has been impossible to find a good quality reproduction Ignition Coil for the CJ2A and CJ3A. No Longer.

Now Available - Our new 6 Volt Ignition Coils complete with Bracket.

- Introductory Price - $65.00 -

Fuel Tank - CJ2A, CJ3A, CJ3B & CJ5

These are high quality reproduction Steel Fuel Tanks for the CJ3A, CJ3A, CJ3B and CJ5. These tanks are stamped Olaco.

- Please call to order -

- Price - $225.00 -

(CJ2A and CJ3A Fuel Tank Pictured.)

*NEW* Early CJ2A - Grill Marker Lights

These are the new exact reproduction Front Grill Marker Lights for the Early CJ2A. On the Early CJ2A these were set behind the grill.

Available as Lefts and Rights with Black or Chrome Bezels.

Please call to order.

- Price $95.00 each -

NEW CJ2A - CJ3A Steel Fuel Line Sets - U.S Made

These are the new Steel Fuel Line Sets for the CJ2A and CJ3A. Includes Flexible Line. These kits are Made in the USA.

- Price - $80.00 -

*NEW* Copper Head Gasket for L Head Engines

Do to frustration with garbage gaskets we now have a source for very high quality gaskets. These are the best gaskets available today.

These are the new Copper covered Head Gaskets available for the L Head Engine.

Copper Head Gasket for L Head Engines - Price $60.00

*NEW* Complete L Head Engine Gasket Set

Do to frustration with garbage gaskets we now have a source for very high quality gaskets. These are the best gaskets available today. Every gasket and seal in this kit is Made in the USA.

This is a complete Gasket Set for the L Head Engine. This kit can be used for the MB and GPW as well as the CJ2A, CJ3A, M38.

This kit contains the Copper Head Gasket listed above and the correct Rubber Rear Rear Main seal listed to the right.

Complete L Head Engine Gasket Set

- Price $150.00 -

*NEW* High Quality New Rear Main Seals - Rope type AND Rubber Type

These are the new Rear Main Seals. Both the Rope type and the Rubber type rear main seal are available.

Rear Main Seal - Rope Type - $35.00

Rear Main Seal - Rubber Type - $30.00

Camshaft - CJ2A & CJ3A

These are NOS Camshafts. They come in original packaging dated from the 50's. Buy one of these now while they still exist. These camshafts will fit all gear driven L Head Engines including the CJ2A and CJ3A.

Camshaft - CJ2A & 3A - Price $300.00

Please scroll down to view more items.

Don't see what you are looking for?

Try checking our CJ2A-CJ3A Catalogs.

NEW Intake and Exhaust Manifolds

These are the new Intake and Exhausts Manifolds for the L Head Engine. This is a brand new product. These are not the same manifolds that other Jeep suppliers are selling. We have tried those manifolds and they are problematic so we are no longer carrying them. If you are looking for a better quality manifold these are the ones to buy. These manifolds also have the part number cast into them like the originals.

- Price - Exhaust Manifold - $275.00 -

- Price - Intake Manifold - $150.00 -

All gaskets and studs available separately.

*NEW *Manifold Stud and Manifold Gasket Sets

These are the new Manifold Stud Sets for the CJ2A-CJ3A. Includes studs, nuts, lock washers and the special washers used only on the manifold.

Also Available - Complete Gasket Set for your Manifolds and the Combined Manifold Gasket and Stud Set.

Exhaust Manifold Repair Kit

This is the most complete exhaust manifold repair kit available today.

- Price - $45.00 -

Vent Valve Kit

This kit contains all of the parts necessary to connect the Valve Cover Ventilator to the Intake Manifold.

Price $95.00

All of the pieces in this kit are available individually. Please see our catalog for more information.

PCV Valve

This valve is always clogged or missing. Fits MB, GPW, M38, M38A1 as well as CJ2A and CJ3A.

- Price $35.00 -

NEW CJ2A - CJ3A Fuel Tank Sending Unit

Never before Available - An Exact reproduction Fuel Tank Sending Unit for the CJ2A and CJ3A. Includes gasket as pictured.

- Price - $45.00 -

Crankshaft Pulley Shield - MB/GPW

These are high quality reproductions of the Crankshaft Pulley Shields used on the MB and GPW.

- Price - $35.00 -

- Pulley shield with "F" Mark Available - Please call to order. -

Dash Data Plate CJ

This is a reproduction of the Dashboard Data Plate used on the CJ2A and CJ3A.

Price $20.00

Firewall Data Plate CJ

This is a reproduction of the Firewall Data Plate used on the CJ2A and CJ3A.

Price $16.00

Cowl/Dash Support

These are a new high quality product which will fit MB, GPW, M38, CJ2A & CJ3A. Left and Right side available.

- CJ2A - CJ3A Cowl/Dash Support - $40.00 per side

NOW AVAILABLE CAGED AND CAPTIVE NUTS

These are the Captive and Caged Nuts used on all body parts such as the floor, the firewall, fenders etc.

10-24 Captive Nut - $6.00 each
1/4-20 Captive Nut - $6.00 each
5/16-18 Captive Nut - $6.00 each
5/16-24 Captive Nut - $6.00 each
3/8-16 Captive Nut - $6.00 each
3/8-24 Captive Nut - $6.00 each
1/4-20 Caged Nut - $4.50 each
5/16-18 Caged Nut - $4.50 each

NEW CJ2A STARTER MOTOR

Now Available are the New Starters for the MB-GPW and CJ2A. These are not rebuilt starters. They are actually a reproduction of the Autolite MZ-4113 Starter. Are you experiencing slow cranking from your so-called rebuilt starter? Most rebuilding shops today do not have the parts to correctly rebuild a starter so rebuilding is not a good option. There is nothing like New. These are available in 6 and 12 volt.

- Price - $400.00 -

- NOT USED ON CJ3A - Call Us for CJ3A Starters -

Starter Bushing (in Bell Housing) - CJ2A Only

This is the Starter Bushing that is pressed into the bell housing. If you are installing a new starter it is always a good idea to replace this bushing.

- Price - $8.00 -

Starter Support Bracket (Rear) - CJ2A Only

This Support Bracket is often missing from Jeeps that are being restored. It supports the rear of the starter by bolting to the engine block.

- Price - $10.00 -

*NEW* CJ2A Floor Starter Switch

For years it has been very difficult and now almost impossible to find a NOS Starter Switch for a WWII Jeep or CJ2A. In addition to that the reproduction starter switches that we and other dealers have been selling for the past 20 years are of a poorer quality and they do not last long.

We have finally now been able to source a new higher quality Starter Switch than what has previously been available. We have found with our own testing that a good starter switch, starter, battery, 6 volt battery cables and proper grounding will give you better cranking.

Please See our "Floor Starter Switch Page" for more information and comparison photos.

- Starter Switch - CJ2A - Price $65.00 -

Prestolite Spark Plug Set

This is a set of four U.S. Made Prestolite Spark Plugs that will fit the CJ2A and CJ3A.

- Price - $25.00 -

Jeep Phone Stand

These phone stands are made from whole oak. Cut and crafted right here in the USA. These make great gifts for the holidays.

- Price - $12.00 -

Light Switch

CJ2A, CJ3A & CJ5

This is an older reproduction light switch that we have in our inventory. Comes with circuit breaker and is U.S. Made. Available with or without knob.

Price $45.00 w/ knob

Price $40.00 w/o knob

Dimmer Switch CJ

These are U.S. Made Old Stock Replacement Dimmer Switch that will fit the CJ2A, CJ3A, CJ3B and CJ5.

Price $15.00

Never Before Available

CJ2A, 3A, 3B & CJ5 6 Volt Horn

Price $150.00

CJ2A Tail Lights

These are exact reproduction Tail Lights for the CJ2A. These are available for the Driver Side and the Passenger Side. These Tail Lights do not include the bulb.

- Price - $65.00 per Tail Light -

Speedometer CJ2A - CJ3A

These are high quality exact reproduction Speedometers for the CJ2A and CJ3A.

- Price - $110.00 -

High Quality Amp Gauge

This is the best reproduction Amp Gauge on the market today not the junk chrome gauges that others sell. They will fit MB - GPW, CJ2A, 3A & 3B.

Price $50.00

High Quality Fuel Gauge

This is the best reproduction Fuel Gauge on the market today not the junk chrome gauges that others sell. They are available in 6 and 12 volt and will fit MB - GPW, CJ2A, 3A & 3B.

Price $50.00

High Quality Oil Pressure Gauge

This is the best reproduction Oil Pressure Gauge on the market today not the junk chrome gauges that others sell. They will fit MB - GPW, CJ2A, 3A & 3B.

Price $50.00

High Quality Temperature Gauge

This is the best reproduction Temperature Gauge on the market today not the junk chrome gauges that others sell. They will fit MB - GPW, CJ2A, 3A & 3B.

Price $75.00

Oil Gauge to Engine Tube Kit

This Kit contains all of the components necessary to connect your Oil Pressure Gauge to the Engine Block.

Price $45.00

All of the pieces in this kit are available individually. Please see our catalog for more informartion.

Oil Filter Element CJ2A, 3A, 3B & CJ5

We have been organizing our warehouse and have found that we have a larger quantity of these filters than we previously thought. For that we are offering them at a special price.

Price $15.00

(please also visit our new CJ catalogues to view many more exciting items)

Oil Filter Canister Assembly with Filter

These are NOS Fram Oil Filter Assemblies for the CJ2A, CJ3A, CJ3B and CJ5. Complete with bands and element.

- Price - $140.00 -

Oil Lines also available for $15.00 each.

Please scroll down to view more items.

Don't see what you are looking for?

Try checking our CJ2A-CJ3A Catalogs.

Steel Brake Line Kit CJ2A

These steel brake line kits are our own product that we have made locally. These lines are exact reproductions -copied from original samples. It is the cheapest (in price) steel brake line kit available today. Our kits even includes the correct bent S lines (see picture below). Many of these kits sold by other dealers have an incorrect flat S line.

Price $125.00

S Lines are available separately - Price $10.00 each

Master Brake Kit CJ2A - CJ3A

This is a master brake kit for the CJ2A and CJ3A. It contains the Master Brake Cylinder, four wheel cylinders, brake shoes for all four wheels, all four rubber brake hose, the correct style hose clips, copper washers for the master cylinder and brake hoses and four brake shoe return springs.

Price $320.00

Master Cylinder and Wheel Cylinder Kit CJ2A

These are reproduction Master Cylinder and Wheel Cylinder Kits for the CJ2A. Each kit contains one Master Cylinder and four Wheel Cylinders (2 front and 2 rear) for the MB/GPW Military Jeep as well as the CJ2A.

- Price - $155.00 -

Master Cylinder and Wheel Cylinder Kit CJ3A

These are reproduction Master Cylinder and Wheel Cylinder Kits for the CJ3A. Each kit contains one Master Cylinder and four Wheel Cylinders (2 front and 2 rear) for the M38 Military Jeep as well as the CJ3A.

- Price - $155.00 -

Stop Light Switch CJ - NOS

These are original NOS Stop Light Switches for the CJ2A and CJ3A with female ends. Make sure that your wiring harness has male pins before ordering this Stop Light Switch.. Opposite style with male pins on the switch available - please call to order. Made in the USA.

- Price - $25.00 -

Draft Pad Set

These are Pedal Draft Pads with springs and washers used on the CJ2A, CJ3A, CJ3B and CJ5 Jeeps. Sold as a set as pictured.

- Price - $15.00 -

CJ2A Brake Tube with Mount

This is a interesting part, the brake tube mounting bracket on all CJ2A's always wears out because it was metal to metal, a poor design. Well I have the fix for this problem a new mounting bracket with a brass bushing, ah yes how sweet it is! I also have the matching tube for it. Sold separately.

- Brake Tube - $35.00 -

- Brake Tube Mounting Bracket - $30.00 -

Master Clutch Control Tube Kit

Kit contains clutch control tube, tube kit, clutch cable, clutch rod and two clutch ball studs.

Price $75.00

All items available individually in the catalog. Please call.

Fuel Pump Kit (Single)

This is a Fuel Pump Rebuilding Kit for a Single Action CJ Style Fuel Pump.

- Price - $40.00 -

Fuel Pump Kit (Double)

This is a Fuel Pump Rebuilding Kit for a Double Action CJ Style Fuel Pump.

- Price - $45.00 -

Carter WO Master Carburetor Rebuild Kit

This Carter WO Master Rebuild Kit is the best carburetor rebuild kit of its type available today. This kit contains a new mixture screw and many other small pieces that are missing from other so called "master" kits. This is a true master rebuild kit.

It amazes me how other dealers use the word master to describe their carburetor kits when the kits that they do offer are far from it. If theirs are master kits than ours would be a godzilla kit. You can see what is included in our kit in the picture above and I know that the kits that others are offering are missing many of those pieces.

Price $55.00

Accelerator Linkage Kit

This kit contains all of the Accelerator Linkage from behind the Engine to the Carburetor.

This kit is for the MB, GPW, CJ2A and CJ3A.

Price $75.00

All of the pieces in this kit are available individually. Please see our catalog for more informartion.

*NEW* Carburetor Upper Choke Linkage - Carter WO

This is the new reproduction of the Carburetor Upper Choke Linkage used on the Carter WO Carburetor. If you are restoring your carburetor this part is often worn out and rusty. This is a great piece to make your carburetor look new.

- Price - $25.00 -

Accelerator Foot Rest

This is one of those parts that are always missing. It is mounted on the floorboard next to the accelerator pedal.

Accelerator Foot Rest - $12.00

Accelerator Pedal Boot

These are high quality reproduction Accelerator Pedal Boots for the CJ2A and CJ3A. This is the boot on the floorboard.

- Price - $15.00 -

*NEW* Choke & Throttle Cable - Black Plastic Knob - U.S. Made

These are Plastic Knobbed Choke and Throttle Cables for the CJ2A and CJ3A. These are an excellent U.S. Made reproduction.

- $20.00 Each - With Housing -

Air Cleaner Flexible Hose w/ Clamps

This is the hose that connects the Air Cleaner to the Air Tube. This is perfect in looks and fit.aaa

- Flexible Hose - No Clamps - Price 28.00 -

- Flexible Hose with Clamps - Price $35.00 -

Clamps also available separately - $3.50 each

Air Cleaner Crossover Tube Complete

This is a complete crossover tube for the air cleaner system that mounts on the cylinder head.

$75.00 complete or all parts sold separately

Inner Windshield Rubber - Molded CJ2A

This is one piece, not vulcanized, just like the original. Fits MB-GPW & CJ2A.

Price $25.00

Single Hand Wiper

These are Single Hand Windshield Wipers for the MB/GPW and CJ2A. This is an exact reproduction.

Price $35.00

Windshield to Cowl Wing Screw CJ2A

This is a nice reproduction of the Windshield to Cowl Wing Screw for the CJ2A.

Price $12.00

Windshield to Cowl Screw CJ3A

This is a nice reproduction of the Windshield to Cowl Screw for the CJ3A.

Price $10.00

Windshield to Cowl Rubber - CJ2A

This is a high quality piece. It is a new softer material and is the best that I have ever sold.

Cowl Rubber - Price $40.00

Correct Screws available - $3.00 per set

Cowl Rubber - CJ3A - CJ3B

We are pretty excited about this new product. This is an exact reproduction of the CJ3A and CJ3B cowl rubber which has been in production for over a year and copied from an original sample. If you are looking for that perfect fit, this is the one to buy. Also fits the M38.

CJ3A & CJ3B Cowl Rubber - Price $59.00

Correct Screws available $3.00 per set.

Early CJ2A Front Bumper

This is our new high quality plain bumper with the correct angled ends for the early model CJ2A. Unlike some of the other junk bumpers that are available this is a beautiful reproduction. This is the same bumper that was used on the WWII Willys MB which was also used on the Early Model CJ2A. This bumper is only used on Jeeps that use Bumper Gussets like those pictured to the right.

Early CJ2A Front Bumper - Price $65.00 -

Early CJ2A Bumper Gusset Set

Now Available A new higher quality bumper gusset set at a new lower price for the early Style CJ2A Bumper.

BUMPER GUSSET SET - Early CJ2A - $60.00 per set of four

Please scroll down to view more items.

Don't see what you are looking for?

Try checking our CJ2A-CJ3A Catalogs.

*NEW* EARLY CJ2A HI-TECH PARKERIZED RIVETS

- FOR FRONT BUMPER GUSSETS -

These are sets of 4 Imitation Rivets for the Front Bumper Gussets on the Early CJ2A Jeep. Each Set is enough for one side of the Jeep. You will need 2 Sets for one vehicle.

These are only used on the Early CJ2A Jeeps that are fitted with bumper gussets.

When threaded together to a certain torque the piece that the ratchet inserts into will snap off leaving a nice and secure rivet which is actually a bolt. No heating or hammering necessary.

These Rivets are all Parkerized. Corrosion resistance at it's finest.

- Price - $16.00 - Per set of 4 Rivets -

Bumper Tow Rope

This is a quality reproduction of the manila tow rope with braided loops found on many early Jeeps.

- Price $50.00 -

Hood Drain

Hood Drain for all flat fender models. This part mounts on the existing hood hinge and diverts water away from the engine along the cowl. This will prevent water from contacting the spark plugs.

- Price$15.00 -

LED Flashlight

We just came across these great flashlights. Being a Jeep collector myself I feel this is a very handy flashlight for all Jeep owners. This is an LED flashlight that is a flashlight and can turn into a spot light by pulling it apart. It slides open. It also has a magnet to hold it in place. This would be great to keep in the Glove Box and a great way to get some lighting under the hood. Batteries included.

- Price $32.00 -

LED Pocket Flashlight

I ran across these fantastic flashlights at an automotive industry show. If you work on your own vehicles these are a great flashlight to have. They are LED lit and very bright. The design is small and light, almost like a pen light. These flashlights are also equipped with a pocket clip and magnet for attaching it to a metal surface. The flashlight shown is black in color, but other colors are available. Batteries included.

Price $10.00

Passenger Side Fender

These are Surplus Military Production Fenders. These came available in the surplus markets. With some modification they can be used on an MB, GPW, CJ2A, CJ3A and M38.

Price $350.00

Transmission Shift Lever Boot

This is a reproduction of the Transmission Shift Lever boot for the CJ2A and CJ3A.

Price $12.00

Transfer Case Shift Lever Boot

This Transfer Boot is new and improved with a high quality material that will resist sun damage. This is a high quality U.S. Made product. Used on the CJ2A and CJ3A.

Price $12.00

Now Available T90 Transmission Rebuilding Service

We can now rebuild your transmissions to new condition using our U.S. Made Transmission parts. These transmissions are assembled by our trained technician.

Please call for more information

Hub Cap CJ

These are the reproduction Hub Caps for the CJ.

Hub Cap - $12.00 each

Black Sheller Steering Wheel

The Long Awaited Black Sheller Steering Wheel is Here.

For years black steering wheels have been made by many different companies and they vary in quality. Some are very poor and some are okay.

This steering wheel is in a class all by itself. This wheel is truly an exact reproduction of the Sheller steering wheel. It has the grooves embossed in it like the original and the Sheller name stamp.

This steering wheel is correct for all early models as well as the CJ2A and CJ3A.

Price $160.00

Early CJ2A Oak Hood Blocks

These are exact reproduction U.S. Made Hood to Windshield Bumpers (Oak Hood Blocks) for the WWII MB and GPW as well as the Early CJ2A. These are the later style bumpers which are made of Oak and were not used on early WWII Jeeps. These bumpers bolt onto the hood and provide support to the windshield when it is in the folded down position, preventing the windshield from resting directly on the hood. These Bumpers come with mounting hardware and are ready to install unlike the unassembled bumpers that others sell. Our bumpers were copied from original samples and are dimensionally correct unlike the bumpers that others sell.

- Price - $30.00 per pair as pictured -

Headlight Chrome Trim Ring

These are nice reproductions Chrome Headlight Trim Rings.

Price $32.50

Spare Tire Carrier

This is a good reproduction of the CJ Tire Carrier. This is the side mounted tire carrier.

Price $30.00

Steering Column Floor Seal & Plate Set

This is the steering column floor seal and plate for the M38 and M38A1. This will also fit the CJ2A, CJ3A and CJ3B.

Steering Column Floor Seal & Plate Set - $20.00 per Set

Tool Box Seal

This is the seal that fits around the tool box door. I had this one copied from the original.

Tool Box Seal - Price $15.00

Mirror Arm - M38 & M38A1

These are high quality double jointed Mirror Arms for the CJ2A, CJ3A, M38 and M38A1. Heavy Duty and correct 4 hole mounting for the listed vehicles.

CJ2A - CJ3A Mirror Arm - Price $30.00

Tinted Mirror Head CJ

These are high quality reproduction mirror heads. These are great mirrors, better than those that other dealers sell.

Price $25.00

*New High Quality* Tinted Inside Rear View Mirror w/ Bracket - CJ2A

These are our new high quality Tinted Glass Inside Rear View Mirrors for the more discerning CJ2A owner. These mirrors have the same tinted glass as our high quality side mirrors. Also fits MB and GPW.

Tinted Inside Rear View Mirror w/ Bracket - MB/GPW - Price $50.00

*New High Quality* Tinted Inside Rear View Mirror w/ Bracket - CJ3A

These are our new high quality Tinted Glass Inside Rear View Mirrors for the more discerning CJ3A. These mirrors have the same tinted glass as our high quality side mirrors in the military style. Also fits M38 and M38A1.

Tinted Inside Rear View Mirror w/ Bracket - M38/M38A1 - Price $50.00