|
PETER DEBELLA JEEP
PARTS
Prices are subject to
change without notice.
Call: (631) 874-8660
Fax: (631) 874-3831
Email: sales@debellajeepparts.com
MB - GPW
GROUP 1 ENGINE
|
MB-GPW
GROUP 1 ENGINE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*NEW* Engine Crankshaft w/ Main & Rod
Bearings
These are the new reproduction Crankshafts. Each
crankshaft comes complete with matching Main and Connecting Rod
Bearings. From Seal Tested.
- Price Upon Request -
|
|
*NEW* OIL PAN WITH SKID PLATE and DRAIN PLUG
These are the new reproduction Oil Pans for the MB and GPW.
Comes with drain plug as pictured. These are an excellent
high quality reproduction of the skid plate. Integral Skid
plate. From Seal Tested.
- Price - $175.00 -
|
*NEW* Engine Connecting Rods
These are the brand new high quality reproduction Connecting
Rods for the L-Head and F-Head Engines used in Jeep vehicles
from 1940 through 1966. Even Rods (#2 & #4) and Odd Rods (#1
& #3) are both available.
- Price - $300.00 per set of 4 or $75.00
individually -
|
Cylinder Head Bolt Set GPW with "F"
- Price - 30.00 - Set of nine Cylinder Head Bolts - - Bolts available
Individually at $3.50 per Bolt -
|
Oil Pan Gasket Set
These are the new Oil Pan Gasket Sets. Comes
with oil pan gasket, drain plug gasket and oil float
gasket. Used on all Jeep 4 Cylinder L and F Head Engines
(MB-GPW, CJ2A through CJ5, M38 & M38A1)
- Price - $15.00 -
.
.
|
Junior Oil Filter Element
These are the new Junior Oil Filter Elements. Comes
with gaskets and washers as pictured.
- Price - $20.00
|
|
*NEW* PUROLATER GPW OIL FILTER ASSEMBLY
These are the new Purolater Oil Filter Assemblies for the
WWII GPW Jeep. These are exact reproductionS. Comes
with two bands as shown. Decals are shipped on a sheet to
be installed by the customer. Oil Filter Element not
included.
- Price - $185.00 -
- Oil Filter Element available separately for $17.00. -
|
Junior Oil Filter Oil Line Set with Fittings
This set contains one Long Oil Line, one Short Oil and three fittings to work with
the Junior Oil Filter. These are the best oil lines
available today in both quality and appearance.
|
Oil Filter Bracket - MB & GPW
These are high quality exact reproduction Oil Filter Brackets
for the GPW. These brackets are marked for the GPW.
This is the bracket that mounts on the Cylinder Head. GPW
Bracket pictured.
- Price - $50.00 -
|
|
Oil Gauge to Engine Tube Kit
This Kit contains all of the components
necessary to connect your Oil Pressure Gauge to the Engine
Block.
Price $45.00
All of the pieces in this kit are available
individually. Please see our catalog for more informartion.
|
Motor Mount - MB & GPW
These are reproductions of the Motor Mounts used on the MB
and GPW.
- Price - $12.50 each -
|
|
*NEW* Copper Head Gasket for
L Head Engines ONLY
Do to frustration with garbage gaskets we now
have a source for very high quality gaskets. These are the
best gaskets available today.
These are the new Copper covered Head Gaskets
available for the L Head Engine. Used on MB, GPW, M38,
CJ2A and C3B
Copper Head Gasket for L Head Engines -
Price $60.00
|
*NEW* Complete L Head Engine Gasket Set
Do to frustration with garbage gaskets we now have a source
for very high quality gaskets. These are the best gaskets
available today. Every gasket and seal in this kit is Made
in the USA.
This is a complete Gasket Set for the L Head Engine.
This kit can be used for the MB and GPW as well as the CJ2A,
CJ3A, M38.
This kit contains the Copper Head Gasket listed above and the
correct Rubber Rear Rear Main seal listed to the right.
Complete L Head Engine Gasket Set
- Price $150.00 -
|
*NEW* High Quality New Rear Main Seals
- Rope type AND Rubber Type
These are the new Rear Main Seals. Both the Rope type
and the Rubber type rear main seal are available.
Rear Main Seal - Rope Type - $35.00
Rear Main Seal - Rubber Type - $30.00
|
|
NEW Intake and Exhaust Manifolds
These are the new Intake and Exhausts Manifolds for the L
Head Engine. This
is a brand new product. These are not the same manifolds
that other Jeep suppliers are selling. We have tried
those manifolds and they are problematic so we are no longer
carrying them. If you are looking for a better quality
manifold these are the ones to buy. These manifolds also
have the part number cast into them like the originals.
- Price - Exhaust Manifold - $275.00 -
- Price - Intake Manifold - $150.00 -
All gaskets and studs available separately.
|
*NEW *Manifold Stud and Manifold Gasket Sets
These are the new Manifold Stud Sets for the MB-GPW. Includes
studs, nuts, lock washers and the special washers used only
on the manifold.
Also Available - Complete Gasket Set for your Manifolds
and the Combined Manifold Gasket and Stud Set.
|
Exhaust Manifold Repair Kit
This is the most complete exhaust manifold repair kit
available today.
- Price - $45.00 -
.
.
.
.
.
.
.
.
|
|
Vent Valve Kit
This kit contains all of the parts necessary
to connect the Valve Cover Ventilator to the Intake Manifold.
Price $95.00 All of
the pieces in this kit are available individually. Please
see our catalog for more information.
|
PCV
Valve This valve is always clogged
or missing. Fits both MB-GPW and M38-M38A1.
-
Price $35.00 - . . .
|
Valve Cover Gasket Set
This set includes the Gasket for the Valve Cover as well as
the Gasket for the Ventilator Cover and the two copper gaskets
for the Valve Cover Bolts.
- Price $12.00 -
|
Engine Stay Cable - MB/GPW
These are high quality reproductions of the Engine Stay Cable
used on the MB and GPW.
- Price - $20.00 -
.
.
|
Crankshaft Pulley - MB/GPW
These are the new high quality reproduction Single Groove Crankshaft Pulleys
from Seal Tested. Used on the MB, GPW and CJ2A (single groove
pulley).
- Price - $50.00 -
|
Crankshaft Pulley Shield - MB/GPW
These are high quality reproductions of the Crankshaft Pulley
Shields used on the MB and GPW.
- Price - $35.00 -
- Pulley shield with "F" Mark Available - Please
call to order. -
.
.
.
.
.
|
|
Engine Hand Crank These
are reproductions of the Engine Hand Crank. They are available for MB and
GPW with correct markings.
- MB $45.00 -
- GPW $50.00 -
|
Hand Crank Nut
High Quality reproduction of the Engine Hand Crank Nut.
- Price - $12.00 -
|
Flywheel Ring Gear - 97 Tooth
These are the new reproduction Flywheel Ring Gears for the
MB-GPW and the CJ2A. 97 Tooth Count. Teeth cut with
the correct beveled edge. See pictures for details.
- Price - $40.00 -
|
Dipstick
These are reproductions of the late style Dipstick used on
the MB-GPW and early CJ2A.
- Price - $20.00 -
.
.
|
|
|
|
Don't see what you are
looking for?
Try checking our MB-GPW
Engine Parts Listing Below. If something does not have a button
to click for ordering then give us a call or send us an email. |
|
Part #
|
Part Description (Engine)
|
Price
|
|
Click for Pictures
|
GROUP
1 ENGINE
|
|
|
WO‑630303
|
Cover,
valve.....
|
$35.00
NOS
|
|
WO‑630305
|
Gasket,
valve cover
|
$5.00
R.
|
|
VALVE-SET
|
Gasket Set, valve cover
(valve cover gasket, ventilator gasket, 2 copper
washers for bolts)
|
$12.00 R.
|
| VENT-KIT |
Vent
Valve Kit |
$95.00
R. |
|
WO‑A‑6919
|
Ventilator
housing, valve cover
|
$15.00
NOS
|
|
WO-630298
|
Baffle,
crankcase ventilator
|
$10.00
R.
|
|
WO-630299
|
Gasket,
crankcase vent housing to cover
|
$2.00
R
|
|
WO-632158
|
Bolt,
valve cover front
|
$POR.
NOS
|
|
WO-639052
|
Bolt,
valve cover rear
|
$5.00
NOS
|
|
WO‑6922
|
Tube,
crankcase ventilator valve
|
$20.00
R.
|
|
WO‑A‑6895
|
Valve,
crankcase vent (pcv)
|
$35.00
R.
|
|
WO‑A‑1534
|
Head,
cylinder
|
P.O.R.
|
|
WO‑638635
|
Nut,
cyl, head
|
$2.00
R.
|
|
WO‑349368
|
Stud,
cylinder head (std)
|
$4.00
R.
|
|
WO-A-1548
|
Stud,
cylinder head (long)
|
$4.50
R.
|
|
GPW-6065
|
Bolt,
cylinder head “F” set of nine bolts
|
$30.00
R.
|
|
WO‑637636
|
Pump,
oil, (cam with chain) U.S Made
|
$POR.
R.
|
|
WO-804484
|
Pump,
oil (cam with gear) U.S. Made
|
$POR.
R.
|
|
WO-A-6749
|
Kit,
oil pump repair for engine with chain
|
$50.00
NOS
|
|
WO-643362
|
Kit,
oil pump repair for engine with gear
|
$50.00
R.
|
|
WO-A-6750
|
Gasket
kit, oil pump
|
$5.00
NOS
|
| WO-375981 |
Stud,
oil pump |
$5.00
R. |
| OP-SPRING |
Spring,
oil pump |
$5.00
R. |
|
WO‑A‑7238
(2)
|
Pan,
oil with skid plate
|
$175.00
R.
|
|
WO‑A‑7238
|
Pan,
oil with skid plate
|
$POR.
NOS.
|
|
WO-630396
|
Float,
oil pan
|
$POR.
NOS.
|
|
WO-630397
|
Support,
float
|
$POR.
NOS.
|
|
WO-639979
|
Plug,
drain oil pan
|
$8.00
NOS
|
|
GPW‑6734
|
Gasket,
oil drain plug
|
$2.00
NOS
|
|
WO-639980
|
Gasket,
oil pan
|
$10.00
R.
|
|
WO-639980-S
|
Gasket
Set, oil pan (oil pan, float & plug)
|
$15.00 R.
|
|
WO‑630103
|
Cover,
flywheel housing inspection
|
$15.00
NOS
|
|
WO‑639051
|
Bushing,
camshaft front
|
$10.00
NOS
|
|
WO‑637065
|
Camshaft,
assembly (chain)
|
$POR.
NOS.
|
| PICTURE |
Camshaft,
assembly (gear) |
$300.00
NOS |
| WO-802576 |
Plate,
thrust, camshaft |
$20.00
NOS |
| WO-375900 |
Washer,
thrust, camshaft |
$15.00
R. |
|
WO-635908
|
Spring,
camshaft thrust plunger
|
$6.00
NOS
|
|
WO-315932
|
Washer,
lock cam gear
|
$3.00
NOS
|
|
WO‑A‑1190
|
Cover,
timing chain
|
$50.00
NOS
|
| WO-A-1463 |
Plate,
front engine mounting |
$POR.
U. |
| WO-384958 |
Stud,
front engine plate |
$3.00
NOS |
|
WO-638457
|
Chain,
timing - High Quality (NOS available call)
|
$90.00
R.
|
|
WO-638458
|
Gear,
timing chain, camshaft
|
$75.00
R
|
|
WO-638459
|
Sprocket,
timing chain, crank shaft - U.S. Made
|
$50.00
NOS
|
| WO-641283
|
Gear,
fiber camshaft, timing
(late type) - U.S. Made |
$85.00
NOS
|
| |
Roller
Chain Timing Set *New Higher quality set includes chain,
cam gear, crankshaft gear (R. Sanders) |
$POR.
R. |
|
WO-931634
|
Seal,
timing gear cover
|
$8.00
R.
|
|
WO-630365
|
Gasket,
timing cover
|
$5.00
R
|
|
|
Crankshaft
|
$P.O.R. R.
|
|
WO-334103
|
Gasket, crankshaft oil
slinger (early chain engine only)
|
$4.00 R.
|
|
WO‑387633
|
Nut,
crankshaft pulley (hand crank)
|
$12.00
R
|
|
WO-638513
|
Nut,
crankshaft pulley
|
$6.00
R
|
|
WO-638113
|
Pulley,
crankshaft
|
$50.00
R
|
|
WO-638113
|
Pulley,
crankshaft precision made (R. Sanders)
|
$95.00
R
|
|
WO-638113
|
Pulley,
crankshaft
|
$POR.NOS.
|
|
WO-SPACER
|
Spacer,
pulley shield kit..6 pc
|
$10.00
R
|
|
WO-A-1124
|
Shield,
pulley crankshaft
|
$35.00
R
|
|
GPW‑6310
|
Slinger,
oil, crankshaft
|
$20.00
NOS
|
|
WO‑635394
|
Ring
gear, flywheel
|
$POR.NOS.
|
|
WO‑635394
|
Ring
gear, flywheel
- 97 tooth, correct beveled teeth
|
$40.00
R.
|
|
WO‑639578
|
Bushing,
(pilot) in flywheel
|
$12.00
NOS
|
|
WO-A-7503
|
Flywheel w/ ring gear
|
$200.00 R.
|
|
WO-A-7503
|
Flywheel
w/ ring gear ("F" available)
|
$POR.NOS.
|
|
WO‑632156
|
Dowel,
flywheel to crankshaft
|
$10.00
R
|
|
WO-632157
|
Bolt,
flywheel to crankshaft (3/8 size)
|
$4.00
NOS
|
|
WO‑A‑439
|
Housing,
engine flywheel
|
P.O.R.U
L
|
|
WO‑A‑1536
|
Gasket
set, engine
|
$100.00
R.
|
|
WO‑A‑1536
|
Gasket
set, engine w/ Copper Head Gasket - U.S Made
|
$150.00
R.
|
|
WO-637237
|
Seal,
rear main
|
$15.00
R
|
| WO-637237 |
Seal,
rear main, rope type - high quality |
$35.00
R. |
| WO-637237 |
Seal,
rear main, rubber type - high quality |
$30.00
R. |
|
WO-A-912
|
Manifold,
exhaust, complete w/ heat riser
|
$POR.
NOS.
|
|
WO-A-912
|
Manifold,
exhaust, complete w/ heat riser
|
$275.00
R.
|
| WO-MANKIT |
Kit,
exhaust manifold rebuild, high quality |
$45.00
R. |
|
WO-645361
|
Manifold,
intake
|
$POR.
NOS.
|
|
WO-645361
|
Manifold,
intake
|
$150.00
R.
|
|
WO-630811
|
Gasket,
intake to exhaust manifold
|
$5.00
R.
|
|
WO‑A‑8558
|
Gasket,
cyl head
|
$15.00
NOS
|
| WO‑A‑8558 |
Gasket,
cyl head, NEW, copper - high quality |
$60.00
R. |
|
WO‑638640
|
Gasket,
manifold to cyl block
|
$10.00
R.
|
|
GPW‑6020
|
Gasket,
cyl block
|
$5.00
NOS
|
| PICTURE |
Manifold,
Gasket and Stud Kit |
$48.00
R. |
|
WO-349712
|
Stud,
manifold to block (long)
|
$2.00
NOS
|
|
WO-300143
|
Stud,
manifold to block (short)
|
$2.00
R.
|
|
STUD-KIT
|
Stud,
manifold complete set
|
$30.00
R.
|
|
WO‑A‑5125
|
Cable,
engine stay
|
$20.00
R.
|
|
WO‑A‑5125
|
Cable,
engine stay
|
$25.00
NOS
|
|
WO-A-7498
|
Mount,
motor
|
$8.00
R.
|
|
WO-A-1051
|
Shim,
engine support insulator.(F available)
|
$12.50
R.
|
|
WO‑A‑1198
|
Oil
line, flex oil gauge tube to block
|
$15.00
R
|
|
WO‑A‑1197
|
Oil
line, flex long oil filter
|
$15.00
R
|
|
WO‑A‑1198
|
Oil
line, Flex short oil filter
|
$15.00
R
|
|
|
Oil
line, Flex, oil filter available in NOS Call me
|
$POR.
NOS.
|
| PICTURE |
Oil
Gauge to Block Line Kit |
$45.00
R. |
|
WO-A-7503
|
Tube,
steel oil line, oil gauge to flex hose
|
$20.00
R.
|
|
WO-387891
|
Fitting,
straight, oil line to filter assembly
|
$5.00
NOS
|
|
WO-384569
|
Fitting,
elbow, flex hose to block
|
$5.00
NOS
|
| WO-384569 |
Fitting,
elbow, oil filter canister |
$5.00
NOS |
| PICTURE |
Fitting,
union, oil line to steel tube oil gauge |
$5.00
NOS |
|
Oil
- Clip
|
Clip
set, oil line
|
$6.00
R
|
|
GPW-18691A
|
Bolt,
oil filter assembly
|
$5.00
NOS
|
|
|
Oil
filter assembly junior military
|
$P.O.R.
U.
|
|
|
Oil
filter assembly w/filter (Replacement type)
|
$50.00
NOS
|
|
WO‑A‑1251
|
Band,
oil filter assembly
|
$12.50
NOS
|
|
WO‑A‑1236
|
Element,
oil filter, w/gasket
|
$20.00
R.
|
|
WO-A-1231
|
Cover,
oil filter assembly
|
$POR.
|
|
WO-A-1233
|
Gasket,
oil filter cover
|
$3.00
R.
|
|
GPW-18691A
|
Bolt
oil filter assembly
|
$4.00
NOS
|
|
GPW-18663
|
Bracket,
oil filter assembly to cyl head "F"
|
$50.00
R.
|
|
WO-A-1247
|
Bracket,
oil filter assembly to cyl head
|
$50.00
R.
|
|
WO-805815
|
Bracket,
oil filter to cyl head (post war)
|
$50.00
NOS
|
| WO-A-6525 |
Dipstick,
oil level late type |
$20.00
R. |
|
WO-A-6525
|
Dipstick,
oil level late type
|
$POR.NOS
|
|
GPW‑6766
|
Dipstick,
oil level late type.... "F"
|
$POR.NOS
|
|
WO‑A‑6915
|
Tube,
oil filler W / vent
|
$35.00
NOS
|
|
WO-A-7280
|
Gasket, dipstick
|
$5.00 R.
|
|
WO‑A‑6796
|
Ring
set, piston...std, 10,20,30,40,60,80
|
$60.00
R.
|
|
WO-PISTON
|
Piston, std
,10,20,30,40,60,80
|
$52.00
R.
|
| SLEEVE |
Sleeve,
for changing bore back to Std. Size |
$35.00
R. |
|
WO‑637047
|
Tappet,
valve W / out adj. screw
(oversized available)
|
$12.00
NOS
|
|
WO‑640020
|
Screw,
tappet adjusting
|
$3.00
NOS
|
|
WO‑637182
|
Valve,
intake
|
$15.00
R.
|
|
WO‑637183
|
Valve,
exhaust
|
$15.00
R.
|
|
WO‑119137
|
Guide,
exhaust
|
$6.00
R.
|
|
WO‑119136
|
Guide,
intake
|
$6.00
R.
|
|
WO-638636
|
Spring,
valve
|
$6.50
R.
|
|
WO‑375994
|
Lock,
valve spring retainer lower
|
$2.00
NOS
|
|
WO-637044
|
Retainer,
valve spring
|
$8.00
R.
|
|
WO‑645160
|
Bearing
set, crankshaft, main std.‑060
|
$115.00
R.
|
| WO-640071 |
Connecting
Rod, #1 & #3 only |
$POR.
NOS. |
|
WO‑A‑7233
|
Bearing
set, rod...std, 10,20,30,40,50,60
|
$65.00
R
|
|
WO-641768
|
Bolt,
connecting rod
|
$5.00
NOS
|
|
WO-636962
|
Nut,
lock, connecting rod nut (Pal nut 3/8" )
|
$1.00
NOS
|
|
GPW-6369
|
Pin,
dowel, crankshaft bearing retainer
|
$1.50
NOS
|
|
WO-337304
|
Stud,
accel. Linkage behind block
|
$2.00
|
|
WO-A-1126
|
Cock,
drain, radiator & engine block
|
$3.50
NOS
|
| PICTURE |
Freeze
out plug, for engine block |
$5.00
R. |
| |
We
are now a distributor of High Quality Parts from R.
Sanders |
|
| |
|
|
| |
END |
|
|
|
