GROUP 18 BODY

*INTRODUCING the All NEW Body Tub Kits from an our all new supplier, SGI from India.

These are the highest quality Body Tubs available on the market today for our hobby.  They may be the best reproduction tubs that will ever be produced.  The bodies fit excellently on frames and all holes come pre-drilled.

Body Tubs available by themselves if you don't need a full kit.

We offer a full range of Bodies.  The following are currently in production;

In Production: Slat Grill - ACM1 - GPW (no script) - ACM2 - CJ2A - CJ3A - CJ3B - CJ5 - M38 - M38A1

Please click below to visit our Body Kit Page for more details.

- BODY KIT PAGE -

(GPW Body Pictured Below)

These are the new Complete Outer Windshield Frames by Seal Tested.  They include the Rifle Rack Mounting Brackets, Windshield to Cowl Rubber and the Hold Down Catches for when the windshield is lying down.  This is a great option considering most windshield frames come completely bare.  Although this is not U.S. made it is a better quality than the other imported frames.

 - Price on Request -

Finally available we now offer an inner windshield frame complete with glass, inner rubber weather seal and adjusting arms.  This is a great option considering most windshield frames come completely bare.  Although this is not U.S. made it is a better quality than the other imported frames.

Price $500.00

- Now available with Willys or Ford marked Glass -

Windshield Frame - MB/GPW

These are high quality reproduction Windshield Frames for the MB/GPW.  Made by SGI.

- Price - $450.00 -

Windshield Frame - Slatgrill

These are high quality reproduction Windshield Frames for the Slatgrill MB.  Never before available.  Has the correct shorter windshield skin - correct for the Slatgrill.  Made by SGI.

- Price - $475.00 -

Inner Windshield Frame - MB/GPW

These are high quality reproduction Inner Windshield Frames for the MB/GPW.  Made by SGI.

- Price - $225.00 -

Windshield Frame Skin - U.S. Made

 This skin is for the lower part of outer windshield. This is the best available and is not to be confused with some of the imports that don't fit. These Windshield Skins are U.S. made.  They are one piece stamped, not welded.

- Price $125.00 -

MB-GPW Rifle Bracket Set

We had these made due to popular demand.  If you do not have rifle brackets on your windshield frame we now have the solution to your problem.  These are high quality reproduction.  They come spot welded and ready to be installed.  This is not the offshore junk that others are selling.  Sold as a set.

- Price $55.00 -

Windshield to Cowl Wing Screws - MB/GPW

They are a new high quality reproduction with correct angled wing. 

- Price $12.00 each -

.

.

Windshield to Cowl Rubber

This is a high quality piece. It is a new softer material and is the best that I have ever sold.

Available Options

COWL RUBBER $40.00 USD COWL RUBBER with SCREW SET $43.00 USD

Cowl Rubber - Price $40.00

Correct Screws available - $3.00 per set

Inner Windshield Rubber - Molded MB/GPW

This is one piece, not vulcanized, just like the original.  Fits MB-GPW & CJ2A.

Price $25.00

. . .

MB-GPW Washer Kit - Inner Windshield Adjusting Arm

This is the Washer Kit for the Inner Windshield Frame Adjusting Arms.  Comes with enough washer for both the left and right side.

- Price - $20.00 -

Top Fastener - Early Push Button Type

These are the Top Fasteners on the top outer edge of the Windshield Frame that the Canvas Top attaches to.  These fasteners are the early push button style.  These early fasteners have always been impossible to find.  We now have available these excellent exact reproductions.

- Sold in Sets of 10 - $55.00 per set of 10

- Later Style Capstan Fasteners also available -

Brass Windshield Latch - Early MB & GPW

These are the brass windshield latches found on Early model MB-GPW.  These are a nice reproduction.

- Price $30.00 each -

Vacuum Windshield Wiper Arm, Blade & Nut Set

- VACUUM WIPERS ONLY -

These are high quality reproduction sets that contain a Wiper Arm, Wiper Blade and Wiper Nut for maintaining the good function of your Vacuum Windshield wipers.

- Price - $19.50 -

Tandem Wiper Set

This is the new generation Tandem Wiper set     for the MB-GPW.  Unlike the previous wiper set available, this is the highest quality available.  Comes complete with all hardware. 

Price $75.00

Single Hand Wiper

These are Single Hand Windshield Wipers for the MB/GPW and CJ2A.  This is an exact reproduction.

Price $35.00

Manual Windshield Wiper Replacement Blade w/ Rivet

These are high quality reproduction replacement Wiper Blades for Single and Tandem Manual Windshield Wipers used on the MB and GPW.

- Price - $20.00 -

.

Don't see what you are looking for?

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

TOOLBOX TOP REPAIR PANEL and GPW TOOL BOX LID

Now available a higher quality toolbox top repair panel.  Available in early and late versions.

Also available now is a high quality reproduction tool box lid.

Toolbox Top Repair Panel (early or late) - Price $45.00

GPW Toolbox Lid - Price $25.00 (MB Lid also available)

Pictured below is the late version of the repair panel.

(Click pictures for larger views)

MB TOOL BOX LID

GPW Toolbox Lid - Price $25.00 (MB & Slat Grill Lids also available)

Available now are these high quality reproduction tool box lid for both the MB (see above) and the GPW (to the left).

Tool Box Seal Set - Rubber

This is a high quality reproduction of the rubber tool box seal used on the MB and GPW. This kit has enough material for sealing both toolboxes on a WWII Jeep.

- Price - $15.00 - 

Also Available - Tool Box Seal Set in Felt  - Price $15.00 (for both toolboxes) -  Please

Tool Box Lock - MB/GPW

These are high quality reproductions of the Tool Box Locks used on the WWII Jeep.  Each MB or GPW uses two of these locks.  Each lock comes with a Key as pictured.

- Price - $35.00 -

.

Trailer Socket Cover

This is the cover that goes in the tool compartment to protect the trailer socket.  These are often missing or rotted out.  These are U.S. Made reproductions.  Highest quality.

Price $20.00

Jerry (Gas) Can Carrier Bracket

These are the new reproduction Jerry Can Carriers from SGI.

Price $75.00

.

NEW Data Plate Sets MB & GPW

These are the New Data Plate Sets available for the MB and GPW.

Willys MB 1942 BRASS - $35.00 --- GPW 1942 BRASS - $35.00 

Willys MB 1943 ZINC - $35.00 --- GPW 1943 STEEL - $35.00

Willys MB 1944-1945 ZINC - $40.00 --- GPW 1944-1945 ALUMINUM - $35.00

*Only one set is currently pictured above.  More pictures to be added.

Now available are these high quality reproduction Glove Box Doors.  Unlike other reproduced glove box doors ours has the tab for the glove box door spring.  Also has holes drilled for Data Plate installation.

Glove Box Door - Price $35.00

Spring, Glove Box Door - MB/GPW

This is a nice reproduction of the Glove Box Door Spring.

Price $6.00

Push Button Lock, Glove Box Door - MB/GPW

This is a great reproduction of the Push Button Lock for the Glove Box Door.

Price $30.00

*Keyed Glove Box Lock also available - Price $40.00 - please call to order.

Seal for the Glove Box Door available in Rubber or Felt.

Price $10.00

Available Options

RUBBER TYPE $10.00 USD FELT TYPE $10.00 USD

Striker, Glove Box Door - MB/GPW

This is a nice reproduction of the Striker for the Glove Box Door.

Price - $7.00

Glove Box Bottom Repair Panel

Now available - high quality repair panels for your rotted out Glove Box Bottoms.  Early and Late versions available.

Available Options

EARLY STYLE - NO RIBS $40.00 USD LATE STYLE - RIBBED $40.00 USD

- Price - $40.00 -

Hinge, Glove Box Door - MB/GPW

These are high quality reproduction hinges for the Glove Box Door used on the MB-GPW.  This hinge has the groove for the Glove Box Door Spring.  Made by SGI.

- Price - $15.00 -

.

.

.

.

.

.

.

NEW Rear Floor Riser - U.S. Made

These are the New U.S. Made Rear Floor Risers for the MB and GPW.  We also offer the U.S. Made Floors to go with these new risers.  Please see them farther down the page.

Price $120.00

(Click pictures for larger views)

NEW MB-GPW REAR FLOOR - U.S. Made

We now have available a U.S. Made Rear Floor.  It is available in the MB type and Ford Type.  Pictured below is the Ford Type.  You will find no better quality floor than this today.

- Price - $375.00 -

Rear Floor Pan - MB/GPW

These are high quality reproduction Rear Floor Pan  for the MB/GPW.  Made by SGI.

- Price - $225.00 -

Rear Floor Pan w/ Riser - MB/GPW

These are high quality reproduction Rear Floor Pan with Riser for the MB/GPW.  Made by SGI.

- Price - $300.00 -

.

.

.

Rear Panel - MB/GPW

These are high quality reproduction Rear Panel for the MB-GPW.  Made by SGI.

- Price - $250.00 -

.

.

Don't see what you are looking for?

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

.

We now have available a U.S. Made Front Floor.  These are patterned off of a GPW which is the same as an MB.  They come with the floor drains and the gas tank strap bracket.  Hat channels are sold separetly.

- Price - $375.00 -

Front Floor Assembly with Fuel Tank Well  - MB/GPW

These are high quality reproduction Inner Windshield Frames for the MB/GPW.  Made by SGI.

- Price - $550.00 -

.

Transmission Tunnel Repair Panel - MB/GPW

These are high quality reproduction Transmission Tunnel Repair Panels for the MB and GPW.  From SGI.

- Price - $200.00 -

Front Floor Pan Repair Panel - Driver - MB/GPW

These are high quality reproduction Repair Pans for the MB/GPW Driver Side Front Floor.  Made by SGI.

Price $150.00

Front Floor Pan Repair Panel - Passenger - MB/GPW

These are high quality reproduction Repair Pans for the MB/GPW Driver Side Front Floor.  Made by SGI.

Price $150.00

*New* Early MB High Quality Front Floor Hat Channel Kit - Slatgrill & ACM1 - U.S. Made

This has been another one of those problem parts.  For years we have had poor quality Hat Channel Kits supplied by other suppliers that are not even close to being correct.  Well, that's going to change now.  This is a U.S. Made product and we guarantee that it is the best Hat Channel Kit available today.  It comes complete with all Hat Channels for the front floor for the early MB.

Price $185.00

MB GPW High Quality Front Floor Hat Channel Kit - Ford GPW & ACM2 - U.S. Made

This has been another one of those problem parts.  For years we have had poor quality Hat Channel Kits supplied by other suppliers that are not even close to being correct.  Well, that's going to change now.  This is a U.S. Made product and we guarantee that it is the best Hat Channel Kit available today.  It comes complete with all Hat Channels for the front floor and the wire harness tabs.  Also in the picture to the right you can see the exhaust system weld nut.

Price $185.00

Ford GPW & ACM2 Toe Board Gussets

These are high quality Tow Board Gussets for the Ford GPW and ACM2 style bodies.  From SGI.  Left and Right side are available.

- Price - $40.00 per Gusset - 

Slatgrill & ACM1 Toe Board Gussets

These are high quality Tow Board Gussets for the ACM1 and Slatgrill style bodies.  From SGI.  Left and Right side are available.

- Price - $40.00 per Gusset - 

Fuel Tank Well - Slat Grill

These are high quality reproductions of the early square-cornered Fuel Tank Well for the Slat Grill MB.  Made by SGI.

- Price - $160.00  -

.

.

.

Fuel Tank Well Cap

These are high quality reproduction Caps for the Fuel Tank Well on the MB and GPW.

- Price - $15.00 -

Fuel Tank Well - MB/GPW

These are high quality reproductions Fuel Tank Wells for the MB and GPW.

- Price - $160.00 -

Draft Pad Set (standard)

These are Pedal Draft Pads  with springs and washers used on the MB and GPW.  Sold as a set as pictured.

- Price - $15.00 -

Draft Pad Set (early Rubber)

These are the Early Rubber Draft Pads used on early WWII Jeeps like the Slat Grill.  Sold as a set as pictured.

- Price - $20.00 -

Draft Pad Set (GPW Style)

These are the GPW Style Felt Draft Pads.  Sold as a set as pictured.

- Price - $20.00 -

Ford GPW and MB Front Floor Seal Set

These floor seals help keep air from entering the floor board.  Kits available for both MB and GPW.  Please specify if you order by telephone or email.

- Price $20.00 -

Floor Ring Set

These are the rings necessary to hold the boots and seals to the floorboard of all MB-GPW.

Kit includes transmission boot ring, transfer boot ring, steering column seal ring and dimmer switch seal ring.

Price $25.00 per set

*note - When ordering please include year and model of vehicle.

Leather Transmission Shift Lever Boot

These are Leather Transmission Shift Lever Boots for the MB and GPW.  These boots are the correct green color.

- Price - $15.00 - 

Leather Transfer Case Shift Lever Boot

These are Leather Transmission Shift Lever Boots for the MB and GPW.  These boots are the correct green color.

- Price - $15.00 -

Rubber Transmission Shift Lever Boot

These are Rubber Transmission Shift Lever Boots for the Early MB and GPW.

- Price - $15.00 - 

Rubber Transfer Case Shift Lever Boot

These are Rubber Transmission Shift Lever Boots for the Early MB and GPW.

- Price - $15.00 -

Accelerator Pedal Boot - Leather

These are high quality reproductions of the Leather Accelerator Pedal Boot for the MB and GPW.  This is the boot on the floorboard.

- Price - $12.00 

Accelerator Foot Rest

This is one of those parts that are always missing.  It is mounted on the floorboard next to the accelerator pedal.

Accelerator Foot Rest - $12.00

These are high quality U.S Made reproduction Patch Panels for the Driver Side Lower Quarter Panel.  This section is always rotted out.

- Price $60.00 -

Hat Channel - Left Hand Quarter with Fuel Strap Brackets - MB/GPW - U.S. Made

This is the channel that runs along the left side of the vehicle above the fuel tank which is always rotted out.  It also comes with the two brackets for the Fuel Tank Straps.  This is a U.S. made reproduction, not to be confused with the cheaper priced imports that are out there.

Price - $60.00

MB GPW Cowl/Dash Support - U.S. Made

These are a new high quality product which will fit M38, CJ2A & CJ3A.  Left and Right side available.

Available Options

LEFT SIDE $40.00 USD RIGHT SIDE $40.00 USD

- MB GPW Cowl/Dash Support - $40.00 per side -

Front Driver Side Quarter Panel - MB/GPW

These are high quality reproduction Front Driver Side Quarter Panels for the MB/GPW.  Made by SGI.  Includes the Body Step and the Cowl Support.

- Price - $175.00 -

Front Passenger Side Quarter Panel - MB/GPW

These are high quality reproduction Front Passenger Side Quarter Panels for the MB/GPW.  Made by SGI.  Includes the Body Step and the Cowl Support.

- Price - $175.00 -

Rear Driver Side Quarter Panel - MB/GPW

These are high quality reproduction Front Driver Side Quarter Panels for the MB/GPW.  Made by SGI.  Includes the Axe Head sheath.

- Price - $275.00 -

- Rear Passenger Quarter Also Available by SGI -

.

Body Handle Set

These are reproduction corner and side body handles for the MB and GPW.  These handles are plain with no markings.

Available Options

SET (2 CORNER & 2 SIDE) $75.00 USD ONE SIDE HANDLE $20.00 USD ONE CORNER HANDLE $20.00 USD

                     

- Set of 4 Body Handles (2 side and 2 corner) - Price $75.00

- Each Handle Available Individually - Price $20.00 each -

GPW "F" Marked Body Handles

These are high quality reproduction Body Handles, "F" marked for use on the GPW.

- Each Handle Available Individually - Price $25.00 each -

.

.

.

Don't see what you are looking for?

.

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

.

.

4 Hole Axe Head Bracket - MB/GPW

This is the hinged bracket that holds the head of the axe.  This is an excellent U.S. Made reproduction.

- Price - $20.00 -

.

Axe Handle Bracket - MB/GPW

This bracket is available plain for MB or "F" Stamped for GPW and has the correct angled bar.  It is not flat like others sell.

Available Options

MB PLAIN (no markings) $15.00 USD GPW 'F' Marked $15.00 USD

- Price - $15.00 -

(please also visit our MB-GPW Catalogs to see our full selection

Shovel Head Bracket - MB/GPW

This is a U.S. Made exact reproduction of the Shovel Head Bracket.

- Price - $15.00 -

.

GPW "F" Bolts 

These bolts are a must for that perfect restoration, now available in 5/16, 3/8 and  1/4".

Currently Available "F" Bolts

1-4 X 5-8 NC $2.00 USD 1-4 X 3-4 NC $2.00 USD 1-4 X 1 1-2 NC $2.00 USD 5-16 X 5-8 NC $2.00 USD 5-16 X 5-8 NF $2.00 USD 5-16 X 3-4 NC $2.00 USD 5-16 X 1 NC $3.00 USD 3-8 x 3-4 NC $3.00 USD 3-8 x 3-4 NF $3.00 USD 3-8 x 1 1-2 NC $3.00 USD

1/4 x 5/8, 1/4 x 3/4, 1/4 x 1 1/2, 5/16 x 5/8 coarse or fine,  5/16 x 3/4 coarse,  and 5/16 x 1 inch coarse, 5/16 x 1 1/4 coarse $2.00 ea.
3/8 x 3/4 coarse, 3/8 x 3/4 fine and
3/8 x 1 1/2 coarse $3.00 ea.

NOW AVAILABLE CAGED AND CAPTIVE NUTS

These are the Captive and Caged Nuts used on all body parts such as the floor, the firewall, fenders etc.

10-24 Captive Nut - $6.00 each
1/4-20 Captive Nut - $6.00 each
5/16-18 Captive Nut - $6.00 each
5/16-24 Captive Nut - $6.00 each
3/8-16 Captive Nut - $6.00 each
3/8-24 Captive Nut - $6.00 each
1/4-20 Caged Nut - $4.50 each
5/16-18 Caged Nut - $4.50 each

Available Options

10-24 Captive Nut $6.00 USD 1/4 -20 Captive Nut $6.00 USD 5/16-18 Captive Nut $6.00 USD 5/16-24 Captive Nut $6.00 USD 3/8-16 Captive Nut $6.00 USD 3/8-24 Captive Nut $6.00 USD 1/4-20 Caged Nut $4.50 USD 5/16-18 Caged Nut $4.50 USD

Safety Strap Bracket with Bolt

These are reduction safety strap brackets with bolt for the MB and GPW.  This is the bracket that is bolted behind the shoulder on the doorway.

- Price $15.00

Safety Strap Eyebolt "F"

These GPW "F" Marked Safety Strap Eyebolts for the MB and GPW.  This Eyebolt is attached at the dash and the safety strap hooks to it.

- Price $10.00 -

High Quality Top Bow Set

These are the finest Top Bows available today.  They are made from heavy tubing like the originals were and are available in Willys and "F" stamped GPW.  They also come with the correct footman loops.  These are not the cheap light weight bows that others sell.

MB Set - $175.00

"F" Marked GPW Set - $185.00

Pictured below is the GPW set.

.

.

.

Don't see what you are looking for?

.

.

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

.

.

Master Bow Bracket Set - MB GPW

This is my high quality bow bracket sets with correct markings on the bow pivot.  These are available separately for the MB and the GPW.  We also have a good set available with no markings for the budget minded.

Available Options

MB with markings $130.00 USD GPW with markings $156.00 USD PLAIN (no markings) $115.00 USD

Price $130.00 MB Marked

Price $156.00 GPW Marked

Standard Set $115.00 No Markings for the budget minded

*Note - All parts sold separately. See Catalog.

Rear Top Bow Bracket

After years of only being able to buy junk bow brackets I decided to make own.  These are copied from original samples and made in the USA.  A perfect reproduction.

Available Options

MB BRACKET $20.00 USD GPW 'F' BRACKET $25.00 USD

- MB Bracket - Price $20.00 -

- GPW "F" Bracket - Price $25.00 -

These Brackets are also available in my 8 piece Top Bow Bracket Sets for the MB and GPW.

Rear Seat Frame GPW

This is the new High Quality rear seat frame for the GPW.  This is not the same seat frame that others sell.  It has the right dimensions for folding it up and has all the holes drilled for mounting the cushions.  This seat frame is an exact copy of the GPW frame, not an MB frame with an "F" stamp in it. 

GPW $265.00

Rear Seat Frame MB

This is the new High Quality rear seat frame for the MB.  This is not the same seat frame that others sell.  It has the right dimensions for folding it up and has all the holes drilled for mounting the cushions.

MB $265.00

See detail picture below.

.

.

.

.

Rear Seat Bottom Pan - GPW

These are high quality reproduction Seat Pans for the GPW Rear Seat Frame.  Made by SGI.

- Price - $40.00 -

Rear Seat Bottom Pan - MB

These are high quality reproduction Seat Pans for the MB Rear Seat Frame.  Made by SGI.

- Price - $40.00 -

.

.

Don't see what you are looking for?

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

.

Rear Seat Back Rest Pan - MB

These are high quality reproduction Back Rest Pans for the MB Rear Seat Frame.  Made by SGI.

- Price - $40.00 -

MB & GPW Rear Seat Hooks

I have tried many different manufacturers on this part and chose this one.  It is the best.  Available in unmarked Willys or with GPW "F" stamp.

Price $12.00 - Plain Willys

Price $15.00 - GPW w/ "F" Mark

Rear Seat Foot Rest - MB & GPW

These are Reproduction Rear Seat Foot Rests for the WWII Jeep.  They are available in both the MB and GPW Style.  Please see the pictures to see the differences.

Available Options

FOOT REST - REAR - MB $30.00 USD FOOT REST - REAR - GPW $30.00 USD

- Price - $30.00 - per Foot Rest - 

*NEW* Crash Pad Set

This is the new generation of reproduction Crash Pads.  This Set contains both the Left and Right Crash Pad Plate and padding for both with spring.  This kit does not include the canvas covers.

- Price - $55.00 -

.

.

Don't see what you are looking for?

.

Try checking our MB-GPW Exhaust Parts Listing Below.

.

If something does not have a button to click for ordering then give us a call or send us an email.

.

.

MB-GPW Early Small Mouth Driver Seat Pan

These are reproduction Early Small Mouth Driver Seat Pans for the MB and GPW.  Made by SGI.

- Price - $35.00 -

MB Seat Frame Back Rest

These are new reproduction Seat Frame Back Rests for WWII Jeep Seat Frames.  These back rests are plain with no markings.

- Price - $35.00 -

MB-GPW Large Mouth Driver Seat Pan

These are reproduction Large Mouth Driver Seat Pans for the MB and GPW.

- Price - $35.00 -

MB-GPW Passenger Seat Pan

These are reproduction arge Passenger Seat Pans for the MB and GPW.

- Price - $35.00 -

These are better quality reproduction Driver Seat Frames for the MB.  They have the large mouth fuel tank opening and.  These Seat Frames come pre-drilled for cushion installation (see pictures for details).  These are better quality than what is being offered by our competition.

- Price - $175.00 -

These are better quality reproduction Passenger Seat Frames for the MB.  These Seat Frames come pre-drilled for cushion installation (see pictures for details).  These are better quality than what is being offered by our competition.

- Price - $175.00 -

These are reproduction Seat Frames for the early Slatgrill MB.  These Seat Frames come pre-drilled for cushion installation (see pictures for details).  These Seat Frames have the Split in the tubing right at the top which is correct for the Slatgrill. Driver and Passenger available.

- Price - $200.00 -

*New High Quality* Tinted Inside Rear View Mirror w/ Bracket - MB/GPW

These are our new high quality Tinted Glass Inside Rear View Mirrors for the more discerning MB and GPW owner.  These mirrors have the same tinted glass as our high quality side mirrors.

Tinted Inside Rear View Mirror w/ Bracket - MB/GPW - Price $50.00

Inside Rear View Mirror w/ Bracket - MB/GPW

Inside Rear View Mirror w/ Bracket - MB/GPW - Price $40.00

.

.

.

.

.

.

.

.

.

.

Mirror Arm MB- GPW

These Mirror Arms are a very high quality product.  They are probably the best that I have seen reproduced.  They have the correct acorn nuts and the correct fiber washers.  Combine this with my tinted mirror to the right and you’ll have a perfect mirror and arm. 

Price $40.00

Tinted Mirror Head MB-GPW

These are high quality exact reproduction mirror heads.  They are marked King Bee and are available with or without the "F" mark.

Available Options

MB Plain with King Bee Marking $25.00 USD GPW with F & King Bee Markings $25.00 USD

Price $25.00

Oil Can Bracket

This is an exact reproduction of the Oil Can Bracket.  These are plated (not painted) and they even have the B stamped on the bottom of them, just like an original.

- Price - $18.00 -

Hood Drain 

Hood Drain for all flat fender models.  This part mounts on the existing hood hinge and diverts water away from the engine along the cowl.  This will prevent water from contacting the spark plugs.

- Price$15.00 -

(please also visit our MB-GPW Catalogs to see our full selection of Jeep Parts)

Firewall Pad

This is the best reproduction of the firewall pad available.  All holes are pre-drilled and comes with mounting hardware.

Available in four types; Ford GPW; middle and late MB - $80.00

MB early Slat Grill $85.00

Rubber Dash Grommet Set 

These are all of the grommets used on the dash and engine compartment.  Grommet Set comes complete with instructions for grommet location.

 - Price $20.00 per set -

Engine Grommet Set - Felt - GPW

This kit contains all of the Grommets used in the Engine Compartment in the Felt Style for the GPW.

 - Price $12.00 per set -

Firewall (Dash) Grommet Set - Felt

This kit contains all of the Grommets used on the Firewall in the Felt Style for the GPW.

 - Price $20.00 per set -

Body Mounting Pad Set MB

These are 14 piece Body Mounting Pad Kits for the Willys MB.  These are the correct rubber pads and felt for the MB.

- Price - $25.00 - 

Body Mounting Pad Set GPW

These are 14 piece Body Mounting Pad Kits for the Ford GPW.  These are the correct fabric pads and felt for the GPW.

- Price - $25.00 - 

Radiator Seal Set - MB/GPW

This is the Radiator Seal Set complete with staples that goes between radiator and grill.

- Price - $30.00 -

Radiator Seal Set - Slat Grill

This is the Radiator Seal Set complete with staples that goes between radiator and grill.

- Price - $30.00 -

Grill - MB/GPW

These are high quality reproduction Grills for the MB-GPW.  Made by SGI.

- Price - $200.00 -

Grill - Slat Grill MB

These are high quality reproduction Grills for the Slat Grill MB.  Made by SGI.

- Price - $225.00 -

.

.

.

Grill Welting Kit MB-GPW

This is the grill welting material that is riveted to the grill.  All of the pieces in this kit are cut to length and ready to be riveted.  This kit comes with the welting material and rivets as pictured.

- Price - $17.00 -

.

Don't see what you are looking for?

.

Try checking our MB-GPW Exhaust Parts Listing Below.

. 

If something does not have a button to click for ordering then give us a call or send us an email.

.

Front Fender Anti-squeak Set

This set covers both front fenders.

Price $20.00

Footman Loops - 6 Piece Set - MB/GPW

This is a set of 6 high quality reproduction footman loops used on the MB and GPW.

- Price - $18.00 per set of 6 -

.

.

.

.

Windshield Hold Down

Finally available we have an excellent reproduction of the hood and windshield hold down with the flat surface and hole.

Windshield Hold Down - Price $17.50 each

.

.

.

Hood Hold Down

Finally available we have an excellent reproduction of the hood and windshield hold down with the flat surface and hole.

Hood Hold Down - Prices $17.50

Catch, Hold Down

These are a good reproduction of the catches that the Hood and Windshield Hold Downs hook onto.

- Catch, Hold Down - Price $3.50 each -

Don't see what you are looking for?  

Try checking our MB-GPW Exhaust Parts Listing Below.  If something does not have a button to click for ordering then give us a call or send us an email.